DISCLAIMER: The following information is provided as a GUIDE ONLY, and should only be used as a reference. If you

do not have the skills required for such a task, please take your car to a professional. Neither myself or OzHonda

take responsibility for your actions and carry out these actions at your own risk.

Aim: To replace front springs
Tools and parts: Hammer, ratchet, 10mm 12mm 14mm 17mm spanner, beer, jack stands, jack, and a lot of

swearing, spring compressor, patience and maybe some other little stuff.
Steps: have about 22 pics or so
Additional information: SAFETY FIRST! & Good to have a mate to be there to help if anything goes wrong.



THIS IS BEING PERFORMED ON MY ED9 '89 CRX
and also i don't know specific names on the parts but just trying my best




Pop the hood and locate the upper mounting bolts & nuts n stuf



Use an allen key (don't know what size but i found one that exactly fit, from the shed) and spanner thing to loosen

up the spindle nut on the shocks. Just a couple turns will do fine. DO NOT UNDO IT ALL THE WAY!

Then move on to the nuts on the side and just loosen those up a bit too, but do not take it all the way off.


Jack the car up and support it on stands.