Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
PART 1
Since we r unable to get our hand on a JDM EG6 halfcut, my mate have decided to forget bout the additional 10hp and go for the AUDM vtir halfcut instead. The swap is still far from done but we have decided to document it as we go along.
The A/T D16Y4 still in my mate's CXI
B16A2 out from a wreck VTIR
Miscellenous stuffs, i.e pedals assembly need for conversion from auto to manual, shafts, radiator, shift linkage etc, etc...
The VTIR looms, theres more but tats about all we need for the swap.
First and foremost, we stripped the whole interior, so as to swap the vtir loom in.
The vti loom is more or less in placed now, but there is a problem, we cant seems to find the connector to the ceiling light now. we have labeled every connector but the vtir loom seems to be missing that connector. we decided to leave this till a later stage and begin stripping the engine bay first.
That is all for now. more to come.
Wynode edit: Fixed up images + disclaimer
Reply With Quote
Bookmarks