Results 1 to 12 of 18

Threaded View

  1. #1

    DIY: Ways to "Re-vamp" your car

    Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk..

    These are just a few ideas to help you "re-vamp" your car.. I did them, and now I'm just sharing it.. it may be ghetto to some, but that's the beauty of D.I.Y.. you do it YOUR way..

    *Old looking windscreen wipers could be "re-vamped" by taking them off, give them a good wipe with alcohol, then spray them over with any colour of your choice.. in my case, I used satin black straight from a can..
    Click image for larger version. 

Name:	DSC00823.JPG 
Views:	249 
Size:	21.4 KB 
ID:	9103

    *Old looking sideskirts and door moulds, my solution was to wipe them down with bug & tar remover, then alcohol, then I went over it a few times with shoe polish!.. the stuff that comes in a bottle with that little foam thing on the end for application..
    I applied 2 coats, let it dry a little, wiped it down then applied another coat..
    Click image for larger version. 

Name:	moulds.JPG 
Views:	379 
Size:	14.0 KB 
ID:	9105

    *As you noticed, my fuel hatch is also black.. yes, I also sprayed that because I thought it was "cool" to attach a sticker there.. few years later, beeyatch wouldn't come off, so I sanded it down, applied a few coats of satin black from a can then a few clear coats over the top..

    *Changed my cluster lights to LED's.. used blue.. they're alot brighter when you're actually there.. it's not very bright in the picture! I used 1 T10 and 5 T5 inverted led's..
    Click image for larger version. 

Name:	leds.JPG 
Views:	326 
Size:	7.0 KB 
ID:	9110

    *Inside looking a little dull and boring?.. "Re-vamp" it up with some colour!!.. I've sprayed my vents, inside door trims and speaker covers.. I primed them with some Plastic Adhesion Primer, then gave it a few even coats of the colour of my choice.. I use to have blue, then Machinery Grey, and now it's finally black.. the paint I used is Vinyl Paint..
    Blue:
    Click image for larger version. 

Name:	blue.JPG 
Views:	382 
Size:	21.4 KB 
ID:	9106
    NB: Disregard the drunk guy.. only picture I had with Blue in the car..

    Machinery Grey:
    Click image for larger version. 

Name:	Grey.JPG 
Views:	198 
Size:	22.2 KB 
ID:	9107

    Spraying it black:
    Click image for larger version. 

Name:	black.JPG 
Views:	231 
Size:	21.7 KB 
ID:	9108

    *DIY black housing headlights and a lip also makes a deal of difference..
    Click image for larger version. 

Name:	lip light.JPG 
Views:	305 
Size:	22.9 KB 
ID:	9109

    Well, that's all for now.. next things to go on the car are foglights and a civic type-R spoiler! These are just some of the simple things I wanted to share with you guys.. it's effortless and easy, and so not time consuming..
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSC00818.JPG 
Views:	252 
Size:	20.8 KB 
ID:	9104  

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.