Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
Aim: remove radio from a DC2 Intergra.
Required: philips head screw driver, flat head screw driver,
step 1
undo the 2 x screws at the back of the center consol, one either side
Step 2
using a flat head screw driver gently lift the cover
Step 3
undo the two screws
Step 4
Lift the handbrake lever and lift out the center console, Remove the ash tray and Undo the two screws shown below one either side. remove the gearshift knob , turn anti clockwise
Step 5
Undo the two screws shown below.
Step 6
remove the ashtray assembly, and undo the wiring harness holding it on ( see
blue arrow ) then remove the two scews ( green arrows )
Step 7
pull out console.
Step 8
undo the radio screws under the back of the radio
pull the radio out, replace with new one and reinstall in revers order.
happy stereo removal
Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
Reply With Quote
Bookmarks