Quote Originally Posted by beeza View Post
Geez,I read that wrong didn't I...
Ok,so
- 15A switch mounted and hidden.
- Then run a + and - cable from the PGMFI to the switch.That's it?

I just have to find which wire is + and -
)n my 96Ek1 Civic the PGMFI is behind the glovebox in the corner
if u run + & - to the switch u will get dead short circuit when u turn on switch.

just cut the power feed to the pump,ie yellow/green? wire wherever u can find it going to the rear of your car under the back seat,& attach the 2 cut ends to the switch,then it just connects this wire back together when u operate the switch.