Quote Originally Posted by Red_EG4 View Post
did you take any closer pictures of where you filed the gutter rash?
Not really, one wheel had quite alot, but the other 3 were pretty good just a few spots here and there. You just need to file very slowly with a fine file, and try keep with the lines of the wheel, so that it blends in. Round the corners and if its deep just do what you can, and try not to file out too much metal otherwise you will get flat spots, and you'll see it. Then once your happy get some 600grit wet n dry, and go over the parts you filed. Then work your way up to 800, then 1200, then 2000. and finally polish.

When your done it should look pretty much like new..

Here's the centre caps mounted in the wheels.