Results 1 to 12 of 53

Threaded View

  1. #1
    Newcomer Array
    Join Date
    May 2009
    Location
    Australia
    Car:
    Honda Integra Gsi 2000

    Fix your own Mags

    The following are provided as a GUIDE ONLY, and neither myself. nor the original writer, nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!

    Hey guys I just wanted to post this to show every one what you can do with a little bit of money and alot of patience.

    This is just to show every one that you shouldn't just go out and spend alot of money on new mags you can fix your old ones and make them look even better than new.
    Enjoy
    You will need about $60.
    I bought every thing I needed from super cheap.
    2x cans of white enamel paint.
    2x Primer.
    1x Clear coat.
    1xBody putty
    And a range of rough and smooth sand paper.

    Before:
    http://img190.imageshack.us/img190/508/sv400034.jpg
    Sanded down:
    http://img195.imageshack.us/img195/4808/sv400036.jpg
    Spraying:
    http://img189.imageshack.us/img189/9568/sv400039.jpg
    After:
    http://img223.imageshack.us/img223/4553/sv400048.jpg
    On the car:
    http://img6.imageshack.us/img6/3735/sv400049y.jpg
    Hope this has inspired some one to fix their own Rims instead of spending alot of money on new ones.
    Last edited by TegzGsi; 01-06-2009 at 08:32 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.