Disclaimer: The following is provided as a GUIDE ONLY, and neither myself, nor OzHonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!

Aim: To fit a Carbon Fibre Js Racing intake to my eg5 HB.



Time: 1hr or less

Required:
- 10mm Ring Spanner/Ratchet
- Standard Screw driver
- Phillips Screw Driver
- Js Intake
- 1 Nut/bolt/washer

Info:
Yo with much who har and what not around this intake i took it upon my self to get one in and fit it, simple to do, here is my guide, pretty easy too.

Step 1:
Ok pop your bonnet so we can romove ur existing intake. Min happened to be a sexy JDM eg6 SIR stock box and pipe, i shed a tear. Simply remove all teh hoses hangin off it, remove the clamp on the throttle body and also teh 3 10mm bolts holding the box to the body.




should look like this when its all gone:




jdm vs js: