Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
Hey guys if you wanna have that tuner look under your bonnet from fast and the furious with all those blue wires and hoses, then all you need is blue electrical tape...
To do this you need to cut long pieces of blue tape off and cover the wire with it long ways...
It is best if you can to take off the wire/s or hose and do it from there much more room and time give then to perfect it right...
step 1. cut the tape in long pieces (measure it according to hose/wire/s)
step 2. take hose/wire/s off and place them down
step 3. slowly line up your tape straight to the side of the hose/wire/s
step 4. apply it slowly to perfect it
step 5. make sure its on nice and firm, with no tape bits sticking up or off
step 6. apply the hose/wire/s again back to where they came from and your DONE!!!
THIS SHOULD TAKE ANYWHERE BETWEEN 10-20 MINUTES DEPENDING ON HOW MANY HOSES/WIRE/S YOU DO...
its not the best thing in the world but its a lil good DIY that gives you that tuner look and neatens up your bay abit more
POSTED 1 PICTURE UP A POOR ATTEMPT BUT YOU GET THE DRIFT OF IT.... sorry guys didnt know how to upload properly and like i said dont expect the best thing ever lol :P
if any questions PM me and ill help out...
Cheers guys Michael
Reply With Quote
Bookmarks