ok all done now
Stephen i didnt remove the bumber completely. Just the passangers side.
It gave me enough room to get to the 3 bolts that hold the resonator in.
I didn't remove wheel, but turned it to full lock and one by one removed the little plastic clips and bolts as i felt play in the bar i just kept undoing until the bar "popped out" below the headlight. It took a bit of a pull but no problems.
It is easy as to get to 2 of the 3 bolts, dont have to remove bar for that.
Its the 3rd one at the front that is a biatch. The three u need to remove are a goldy colour.
If you manage to get the bar out, the 3rd (front) bolt is easy to get to.
If u undo the ones that are easy to get to, the resonator comes apart. Remove that bit and wiggle the bit left behind, that will give u an idea where the 3rd screw is. (top left as you look at side of car)
Its hard to explain, but not overy hard to do.
BE PATIENT AND GENTLE!!
(the above probably doesnt help I know, but its hard to explain and camera had flat battery)
Bookmarks