Calibrating the Voltage on the TPS

[DB8R]

try to adjust for WOT first then tweak for a closed throttle

if you check a few posts back of mine I actually list a range, just as long as you're between there you should be right

Thanks for the reply,

I've done that too tried to set it at 4.5v on full throttle and close throttle was 0.02v started car ECL came which was again code 7 TPS so just put it back to 0.50v unless I've got another faulty TPS.

IACV valve has been replaced and cleaned I've disconnected this while car started and revs dropped does this mean it's working fine.