Need some advice guys.

I've recently changed the bushes on my upper control arms and forgot to check that the bolts that hold the control arm in, fit snug inside the bushes.

Anyhow, I re-installed it all, went for a drive and there is a lot of play on the control arm. It makes a knocking/clanging noise, especially when going over bumps etc..I know this is due to the bolt not fitting into the bushing properly. Not to mention it creaks like an old rocking chair when i go over speed humps too, and i didn't even tighten the bolts so tight that it cant move up and down.

Is this normal? cos I don't recall this knocking noise before I changed the bushes.
has anyone had a similar problem? the noise is really annoying, and I'm afraid it will do more damage then its worth.

Car is 97 EK Civic Hatch.

cheers for any advice.