|
Threaded View
  aldo10 B18C7 into GSi 02-01-2016, 08:11 AMundefined bennjamin RIP to dear old dad , he left... 02-01-2016, 01:20 PMundefined aldo10 Thanks, yep dad loved his... 02-01-2016, 01:54 PMundefined PJT Sounds like you've got it... 02-01-2016, 05:24 PMundefinedundefined aldo10 Hi, yep I did get the ECU... 02-01-2016, 07:55 PMundefined aldo10 Hi guys, well after 4 months... 14-05-2016, 12:37 PMundefined dylspil cant speak from experience... 14-05-2016, 01:08 PMundefined PJT Don't need to separate. Just... 15-05-2016, 01:59 AMundefined Daveho1 Yep, personally I think it's... 15-05-2016, 06:16 AMundefined PJT Easy if you have access to a... 15-05-2016, 12:43 PMundefined aldo10 Yeah I wish I had access to... 15-05-2016, 01:13 PMundefined aldo10 Are there any markings on the... 15-05-2016, 01:16 PMundefined PJT B18C7 into GSi 15-05-2016, 01:31 PMundefined aldo10 Hmm ok, mines been pulled... 15-05-2016, 02:13 PMundefined PJT Yeah. It's common for the... 15-05-2016, 02:52 PMundefined PJT Also, you can def pull the... 15-05-2016, 02:54 PMundefined aldo10 So ... separating the bottom... 16-05-2016, 12:26 PMundefined PJT Woah. Hold up. First learn... 16-05-2016, 12:31 PMundefinedundefined cbauto Are you trying to get Aldo to... 16-05-2016, 01:03 PMundefined PJT Don't feed the troll Aldo. 16-05-2016, 01:14 PMundefined aldo10 Fellas it's coming along... 04-06-2016, 01:19 PMundefined PJT Yeah you need that canister... 04-06-2016, 01:23 PMundefined aldo10 Ok cheers I'll see what I can... 04-06-2016, 01:37 PMundefined dorikin The large port the c7 is for... 04-06-2016, 07:10 PMundefined aldo10 B18C7 into GSi 04-06-2016, 08:53 PMundefined dorikin What loom is that plug on?... 04-06-2016, 09:03 PMundefined aldo10 Yep that plug is on the C7... 04-06-2016, 09:06 PMundefined dorikin I would say it's for the... 04-06-2016, 09:09 PMundefined aldo10 I've had a good look and... 04-06-2016, 09:13 PMundefined aldo10 Everything else seems to... 04-06-2016, 09:14 PMundefined dorikin B18C7 into GSi 04-06-2016, 09:17 PMundefined aldo10 Fellas if I can ask a... 09-06-2016, 08:19 PMundefinedundefined rc_ Yes there are different... 09-06-2016, 08:52 PMundefined PJT Didn't you get a gearbox with... 11-06-2016, 06:36 PMundefined aldo10 Hi there, yep the motor came... 11-06-2016, 07:07 PMundefinedundefined rc_ Sounds like you're set then. 11-06-2016, 08:27 PMundefinedundefined cbauto just hope it doesn't like... 11-06-2016, 08:32 PMundefined aldo10 I asked the question about... 11-06-2016, 07:08 PMundefined PJT Good job! Can I just suggest... 11-06-2016, 07:09 PMundefined PJT Yeah. It's just a regular... 11-06-2016, 07:10 PMundefined aldo10 Oh I'm finding out about... 11-06-2016, 08:06 PMundefined PJT Nah dude. You'll be stoked... 12-06-2016, 02:03 PMundefined aldo10 Well it's out and just... 12-06-2016, 02:48 PMundefined aldo10 Fellas just a question... 14-06-2016, 12:58 PMundefined PJT I don't know for fact of the... 14-06-2016, 01:38 PMundefined PJT Hard race also make a... 14-06-2016, 01:40 PMundefined aldo10 Cheers PJT. Appreciated. 14-06-2016, 01:46 PMundefined aldo10 Fellas, how important is it... 16-06-2016, 05:02 PMundefinedundefined cbauto 2/10. 16-06-2016, 09:27 PMundefined PJT Yo you vtaking yet?? 01-07-2016, 01:47 PMundefined aldo10 B18C7 into GSi 20-09-2016, 07:57 PMundefined PJT If it's just spark plug cover... 20-09-2016, 08:04 PMundefined EKVTIR-T 9.8NM but be very... 20-09-2016, 08:17 PMundefinedundefined bennjamin plus
do it with a tiny... 21-09-2016, 07:02 AMundefined aldo10 Sorry fellas, tension onto... 21-09-2016, 04:52 AMundefinedundefined Super-DA9 He's talking about one of the... 21-09-2016, 09:17 AMundefined aldo10 Excellent, thanks for that.... 21-09-2016, 09:44 AMundefinedundefined aldo10 Well, I've hit the first... 21-09-2016, 10:24 PMundefined cbauto Sounds like the immobiliser 21-09-2016, 10:36 PMundefined aldo10 Cheers CB, I've read where... 22-09-2016, 02:23 PMundefined dorikin Yes sir
There is a diy guide... 22-09-2016, 03:52 PMundefined aldo10 I've found this
... 22-09-2016, 04:11 PMundefinedundefined aldo10 Hi fellas, I followed that... 23-09-2016, 05:50 PMundefined undefined rc_ Good work getting it going. ... 23-09-2016, 06:31 PMundefined aldo10 Thanks, I'll check the header... 23-09-2016, 08:56 PMundefinedundefined rc_ You might want to check the... 23-09-2016, 09:08 PMundefined aldo10 Thanks RC. Will do. I... 23-09-2016, 11:42 PMundefined aldo10 Would someone have a... 30-09-2016, 06:11 PMundefined aldo10 On the HAmotorsports site I... 30-09-2016, 06:20 PMundefinedundefined rc_ B18C7 into GSi 30-09-2016, 07:31 PMundefined aldo10 Thanks RC. My chassis is... 01-10-2016, 10:59 AMundefinedundefined rc_ If the chassis is 96 it... 01-10-2016, 11:31 AMundefined aldo10 Cheers RC. It's a July 96... 02-10-2016, 08:08 AMundefined aldo10 I'm curious if some of the... 03-10-2016, 06:26 PMundefined dorikin B18C7 is OBD2a so just search... 03-10-2016, 08:04 PMundefined aldo10 Ok thanks. The company in the... 04-10-2016, 08:43 AMundefined dorikin Just go to the wreckers and... 06-10-2016, 02:01 PMundefined aldo10 My power steering hose leaked... 14-11-2016, 05:26 PMundefined PJT B18C7 into GSi 14-11-2016, 06:19 PMundefined Vvvtec november 2016
c7 swap
... 16-11-2016, 09:36 PMundefined aldo10 B18C7 into GSi 17-11-2016, 02:36 PMundefined aldo10 Well it's finally finished! I... 19-11-2016, 05:12 PMundefinedundefined cbauto I know this feel. 23-11-2016, 02:26 PMundefined aldo10 Ok I've managed to put around... 22-11-2016, 07:38 PMundefinedundefined Super-DA9 Pull the code from the ECU... 22-11-2016, 08:17 PMundefined Vvvtec Op should resort to using... 25-11-2016, 09:15 PMundefined aldo10 Just a oil consumption issue... 08-12-2016, 04:45 PMundefinedundefined rc_ B18C7 into GSi 09-12-2016, 12:41 PMundefined aldo10 To anyone that might ask if... 08-12-2016, 08:53 PMundefined aldo10 Cheers RC, no I didn't... 10-12-2016, 05:32 PMundefined rc_ Yeah, mine was a rebuild at... 10-12-2016, 05:46 PMundefined aldo10 Interesting. Mine supposedly... 10-12-2016, 07:21 PMundefined aldo10 Folks just a question... 11-12-2016, 03:40 PMundefined rc_ Only the vtec engines had the... 11-12-2016, 03:55 PMundefined aldo10 Thanks RC. I'll hook it up. I... 11-12-2016, 05:05 PMundefinedundefined rc_ It's in the block right up... 11-12-2016, 05:57 PMundefined aldo10 Fantastic. Much appreciated. 11-12-2016, 06:07 PMundefined aldo10 Which I have now found... 11-12-2016, 06:27 PMundefined aldo10 Wired up and no more engine... 11-12-2016, 11:01 PMundefined aldo10 Well I have performed a cold... 18-12-2016, 11:51 AMundefined dougie_504 Ideally you want them within... 19-12-2016, 12:23 PMundefined aldo10 B18C7 into GSi 19-12-2016, 01:59 PMundefined dougie_504 What colour smoke? 21-12-2016, 03:17 PMundefined aldo10 B18C7 into GSi 21-12-2016, 04:04 PMundefined aldo10 Well I've come to the... 24-12-2016, 10:28 AMundefined aldo10 Folks I've finally finally... 25-05-2017, 07:28 AMundefinedundefined Super-DA9 I remember that RS machines... 25-05-2017, 10:23 AMundefined YeahByuddy CP is good 25-05-2017, 10:34 AMundefined rc_ I've used those NPR ones in... 25-05-2017, 12:28 PMundefined beeza Hi aldo,how many km on the... 25-05-2017, 02:14 PMundefined aldo10 Thanks for the responses... 25-05-2017, 02:28 PMundefined beeza Yeah,that's heaps.
Thank... 25-05-2017, 03:53 PMundefined YeahByuddy They usually blow up at... 25-05-2017, 04:08 PMundefined aldo10 Compression in mine was still... 25-05-2017, 04:47 PMundefined beeza Piston rings?
So these... 25-05-2017, 04:57 PMundefinedundefined rc_ Oversized bore will lower the... 25-05-2017, 07:21 PMundefined beeza Ah true.So they are a stock... 26-05-2017, 05:39 AMundefinedundefined rc_ B18C7 into GSi 26-05-2017, 07:34 AMundefined aldo10 At this stage I'm unsure of... 26-05-2017, 06:22 AMundefined beeza Nice one rc,bookmarked!... 26-05-2017, 09:02 AMundefinedundefined Super-DA9 The engine is generally... 26-05-2017, 09:48 AMundefined beeza Would advise not to advise... 26-05-2017, 10:14 AMundefinedundefined Super-DA9 Lol how will the new piston... 26-05-2017, 10:26 AMundefined YeahByuddy Just give em a quick rub with... 26-05-2017, 10:48 AMundefined beeza LOL there's ALWAYS one isn't... 26-05-2017, 10:54 AMundefinedundefined Super-DA9 Dafuq are you on about?
... 26-05-2017, 11:07 AMundefined beeza Cheers gotcha.How do you know... 26-05-2017, 11:48 AMundefinedundefined Super-DA9 http://www.ozhonda.com/forum/c... 26-05-2017, 12:04 PMundefined beeza Nice link :) hehe
Yeah... 26-05-2017, 12:23 PMundefined rc_ There's no point in replacing... 26-05-2017, 01:29 PMundefinedundefined Super-DA9 :thumbsup:
With old... 26-05-2017, 02:11 PMundefined undefined beeza Taken from the comments:
... 26-05-2017, 03:28 PMundefined beeza Only if cylinder walls are... 26-05-2017, 03:23 PMundefined Super-DA9 Beeza, that is not the way to... 26-05-2017, 04:08 PMundefined beeza Alright,cheers for that. 26-05-2017, 07:51 PMundefined Hondarally And pulling pistons out... 26-05-2017, 09:03 PMundefined beeza Thanks Hondarally,cheers mate. 27-05-2017, 01:31 AMundefined aldo10 Fellas I'm at the stage of... 07-06-2017, 11:29 AMundefinedundefined rc_ B18C7 into GSi 07-06-2017, 02:32 PMundefined Super-DA9 Its sizing.. 07-06-2017, 01:36 PMundefined Super-DA9 That is a very helpful book... 07-06-2017, 10:11 PMundefined aldo10 Appreciate that. Thanks I'll... 10-06-2017, 12:18 AMundefined aldo10 Hi fellas I tried ICB... 12-06-2017, 12:32 PMundefined aldo10 Hey guys I’m stuck with... 15-10-2017, 07:36 PMundefined PJT Hmmm. Just unplug it :P but I... 15-10-2017, 07:39 PMundefined aldo10 Cheers. I’ll check it out. I... 15-10-2017, 07:50 PMundefinedundefined PJT Don’t need the boot. Just... 15-10-2017, 07:51 PMundefined aldo10 All done cheers [emoji6]
... 15-10-2017, 08:45 PMundefinedundefined PJT But then you wouldn’t have... 15-10-2017, 08:46 PMundefined aldo10 Too true lol.
Drives... 20-10-2017, 10:19 AMundefined aldo10 B18C7 into GSi 23-10-2017, 08:46 PMundefined PJT Nice work. I had idle... 25-10-2017, 11:38 AMundefined aldo10 Thanks. I’ll get in there and... 26-10-2017, 07:49 AMundefined aldo10 Fellas, is carby clean safe... 31-10-2017, 09:21 AMundefined PJT I used brake cleaner but took... 31-10-2017, 12:38 PMundefined aldo10 B18C7 into GSi 31-10-2017, 04:28 PMundefined aldo10 Well I’ve done a few drives... 04-11-2017, 08:55 AMundefined aldo10 Well a new IAVC unit from... 11-11-2017, 06:18 PMundefined aldo10 Hi fellas, it seems the... 22-12-2017, 09:55 PMundefined DSoulCRX sounds like an idle stepper... 24-12-2017, 11:10 PMundefinedundefined aldo10 I can check for vacuum leaks.... 01-01-2018, 08:01 PMundefined Vvvtec have you tried turning it off... 03-01-2018, 06:32 PMundefined aldo10 I can’t say I’ve tried but... 10-01-2018, 05:52 AMundefined aldo10 Hey fellas just a question on... 11-02-2018, 08:07 PM
-
Good job! Can I just suggest that you figure the emissions stuff and vacuum lines before dropping new engine in there. So little space once it's in!
Sent from my iPad using Tapatalk
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Bookmarks