hey guys & girls, just a quick question regarding the vtec solenoid, i just used a test light to check if the vtec solenoid was working, and put it in the 2 spots shown and it didnt light up at all.. i was doing it in neutral, and i understand that vtec should still kick in in neutral shouldnt it?

secondly, i disconnected the connector to the solenoid and put the light into that side and it didnt light up either so does that mean that the solenoid might be stuffed? or could it be the wiring to the solenoid?

(all these tests were done revving to 7000)

any help would be greatly appreciated (and yes i have searched!)..... thanks in advance!

nic