Results 1 to 12 of 14

Threaded View

  1. #1
    Member Array
    Join Date
    Nov 2005
    Location
    Sydney
    Car:
    CL9

    very uneven left and right camber>>?

    Even since an accident i had, the car is always pulling to the left. The car spun 360 and the front left wheel hit the gutter very hard.
    Anyways... i got the left knuckle replaced and left lower control arm and was able to drive again.
    But then realised the steering wheel wont turn all the way to the right so i got the rear cross member replaced.
    Then... the mechanic noticed the right lower control arm was a lil bent so got that replaced.
    Got a wheel alignment and balancing done and it shows the left camber is -0.58 and right camber is -2.12... which the mechanics think is the reason that the car is still pulling to the left.
    The mechanics said to get a camber kit to patch up the problem. What else needs to be replaced to get it right again???
    Last edited by MRH-22A; 20-08-2006 at 12:59 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.