Quote Originally Posted by XP02ED
ok no a dumb question ready that post and about the relay
he said it can be found under the glove box!

is this where i find it?

btw will i need to unplug the harness to check the main relay wires, im assumin no becaus no power will be put into it,

so im guessing there should be metal bits ontop of the plug to do the test
no,some models are under the glove box,but yours Im fairly sure is above the hood release lever,I removed one from a DC2 recently & I should imagine it would be similarly placed to yours.

Get down near the lever & look up under the dash u should be able to see it.U might be able to test it without removing the plug or relay itself if u can see what your doing.

Heres a pic of where mine lives ,It should be mounted up where u see the wires coming from.



Also below u can see the 2 yel/blk wires joined to the same pin(2nd pin from top left) & u should be able to touch your tester on the exposed metal of the pin from underneath without removing anything as u can see the metal of the other pins as an example.If u cant reach it u'll have to pull it out to test.