Wheels

[fret]

Hi All,

I'm new here, where do you buy wheels in Perth? Do you buy from some shops like Bob Jane T-mart?

[SiReal]

eBay, bob jane, tyre shops, traders on ozhonda. its not that hard really to do a simple search. just go out for a little drive to bob jane.

[fret]

eBay, bob jane, tyre shops, traders on ozhonda. its not that hard really to do a simple search. just go out for a little drive to bob jane.

Wow, very fast response.

I'm thinking to go there, but since i'm new to the car. I want to make sure I don't get ripped off so I post a quest in this forum first.

[SiReal]

once u head out and see a few shops, u'll get an idea of the average price ranges. keep an eye out on the forums for 2nd hand rims and their prices, genuine vs replica prices.

what car do u have?

[fret]

once u head out and see a few shops, u'll get an idea of the average price ranges. keep an eye out on the forums for 2nd hand rims and their prices, genuine vs replica prices.

what car do u have?

I'm getting my civic vti-l on Jan. Will 16" look good on that? or you really need a bigger size?

[SiReal]

16" would look good and be practical, but considering your wheel arches are huge, i would settle for 17". however, look for something that is preferably lightweight, or else you will lose performance.

my advice is to finish of at 50% of the new tyres first to allow all teething problems (if any) to come through the new car - better for warranty, and once the car is all settled and has been run in, then thinking about changing alloys.

also, once u change alloys, ppl usualy want to lower as well. so thats a double whammy. stock car with stock sussy and big wheels = look crap and is slow.

[[ricer]]

i went to bob jane in bankstown near my work place here and they sold buddyclubs wheels!
not a bad price either

[fret]

16" would look good and be practical, but considering your wheel arches are huge, i would settle for 17". however, look for something that is preferably lightweight, or else you will lose performance.

my advice is to finish of at 50% of the new tyres first to allow all teething problems (if any) to come through the new car - better for warranty, and once the car is all settled and has been run in, then thinking about changing alloys.

also, once u change alloys, ppl usualy want to lower as well. so thats a double whammy. stock car with stock sussy and big wheels = look crap and is slow.

errr...

What is the teething problem could explain more??

I don't really care abt performance, I just want the look :P

So stock susp with aftermarket alloy look sucks? oh, and thx for your advise

[SiReal]

teething problems is a general term that is given to problems that happen on new things. i.e. u know when u install windows adn then ur drivers screw up, after a while, things settle. these initial problems are acalled teething problems.

some cars have them, some cars dont (cos theyre made well). stress less.

[Muzz]

Take a look at the rims these guys sell.
http://stores.ebay.com.au/TT-Tyres_W...QQftidZ2QQtZkm
There ebay name is TT-tyres, but there actual store is St. george tyres, u can find their advetisment in the last 2 pages of autosalon magazine (double page). They have some sexy wheels!

Id definatly go 17"s though (check fitiment issues and offsets with otheres first). they range from $600-$800 for the set, and the ones i have (apec apache deep dish 17x7 in white, 7.9kg each rim which isnt bad for the price i paid, $560+postage) seem great quality, also lifetime manafactures warrenty.
Ive had them about 1.5 years, and have driven over tons of LARGE pot holes, and also a brick doing about 50kph, with no dammage whatso ever!, paint is good as new when i wash em.


Shipping is FAST and they have 100% positive feedback on ebay.
mmmm sexy.

[fret]

Thx for the reply. Do you know the exact address? I would like to visit them.

Take a look at the rims these guys sell.
http://stores.ebay.com.au/TT-Tyres_W...QQftidZ2QQtZkm
There ebay name is TT-tyres, but there actual store is St. george tyres, u can find their advetisment in the last 2 pages of autosalon magazine (double page).
They have some sexy wheels!

[Muzz]

let me see here, 204 princess hwy ARNCLIFFE NSW 2205