EK + B18C + ITB + DD-Tune + Shit Street Tyres = 13.51@103mph!

**barefootbonzai** · 14-12-2006 10:53 AM

Originally Posted by Weq

2.160ft is good on street tyres. That MPH puts u at about the same speed as a d-series greddy kit

2.126 to be exact

But yeah, guess i'm just expecting too much cause my Gansta mate pulls 2.0xx 60ft times on streets (toyo proxes).

and lol yeah, give some of the turbo boys a run for there money

Eoh, you might be on to something. I'll have a look when i get home, or if you're reading Sang, something to look into!

**HRD2BQT** · 14-12-2006 11:56 AM

can u also take a pic of the damage for me?? thanks

**xtercii** · 14-12-2006 12:04 PM

I have read a few cases of Hasport failure on honda-tech, I am starting to get scared.

**destrukshn** · 14-12-2006 12:05 PM

only happens on the k series ones? would it be the amount of torque it has?
or just a bad design?
cheers

**JasonGilholme** · 14-12-2006 12:07 PM

Most probably a poor design. Not to mention the lack of mounts. they only use 3 mounts instead of the OEM 5 mounts.

I'd be inclined to use the OEM torque mounts as well as the hasport mounts for the sides and rear.

**xtercii** · 14-12-2006 12:17 PM

They only make the 3 main mounts but you have to put 5 mounts on anyways. And I wouldn’t think it’s because of the k20a’s torque, if that’s the case how they gonna cope with turbo engines.

**destrukshn** · 14-12-2006 12:34 PM

so maybe a bad design.
lol.

**JasonGilholme** · 14-12-2006 12:34 PM

Some people don't use all 5 mounts.

**barefootbonzai** · 14-12-2006 01:12 PM

Yeah i'll keep you posted Eoh.

shit so many experts around. this is a k20 swapped EG we are talking about. Not unless you're gonna custom make/fit the 4th and 5th mount ("torque" mounts), there is only 3 mounts.

**riceball** · 14-12-2006 01:14 PM

i dont know if you could use all 5 mounts actually... the bracket would not fit and would would probably have to customized your brackets by drilling your own holes.

Ill send you some of the photos later on tomorrow evening Eoh.

**destrukshn** · 14-12-2006 01:24 PM

well.. can't you make a solid bracket that goes from the motor to the chassis? and not use the original mounts?
that way you would have to drill holes?
though you'd have to get a competent welder to do so.
lol.