Quote Originally Posted by aaronng View Post
Did you use a tube to direct the spray into the gap? If you didn't, that must have been some looooooong tube that you got with your spray.
I used the clear hose that they commonly use for bleeding brake fluid.
I only used the tube that came with the can, depressed the clutch halfway and slid it into the gap and sprayed a bit - the tube that came with it was about 10-15cm in length. I was able to get the tube in the gap.. with the longer tube do you mean you need to feed the tube into the cylinder then spray deep inside it?

also just to confirm with you, the part I'm meant to be lubing is what the clutch push rod in the footwell goes into?