Lighting / External Lighting / Interior Lighting
Vehicle Standard (Australian Design Rule 13/00 - Installation of Lighting and Light Signalling Devices on other than L-Group Vehicles) 2005
http://www.comlaw.gov.au/ComLaw/Legi...2570D50006B815
Side Marker Lamps
7.2.4. Position:
7.2.4.1. In width: that point on the illuminating surface which is farthest from the vehicle’s median longitudinal plane must not be more than 150 mm from the extreme outer edge of the vehicle.
7.2.4.2. In height: at the same height as far as practicable above the ground not less than 600 mm nor more than 1,500 mm (2,100 mm if the shape of the body-work makes it impossible to keep within 1,500 mm.)
7.2.4.3. In length: According to the arrangement of Clause 7.2.3
That point on the illuminating surface which is farthest from the vehicle’s median longitudinal plane must:
7.2.4.3.1. in the case of rear lamps, not be more than 300 mm from the rear of the side of the vehicle on which the lamp is mounted.
7.2.4.3.2. In the case of front lamps mounted on trailers, not be more than 300 mm from the front of the side of the vehicle on which the lamp is mounted.
Lamp Colours (Including Registration 7 Headlamps)
5.15. The colours of the light emitted by the lamps are the following:
main-beam headlamp: white
dipped-beam headlamp: white
front fog lamp: white or yellow
reversing lamp: white
direction-indicator lamp: amber
hazard warning signal: amber
stop lamp: red
rear registration plate lamp: white
front position lamp: white
rear position lamp: red
rear fog lamp: red
parking lamp: white in front, red at the rear, amber if reciprocally incorporated in the side direction-indicator lamps or in the side-marker lamps.
side-marker lamp: amber; however the rearmost side-marker lamp can be red if it is grouped or combined or reciprocally incorporated with the rear position lamp, the rear end-outline marker lamp, the rear fog lamp, the stop lamp or is grouped or has part of the light emitting surface in common with the rear retro-reflector.
end-outline marker lamp: white in front, red at the rear
daytime running lamp: white
rear retro-reflector, triangular: red
rear retro-reflector, triangular: red
front retro-reflector, triangular: identical to incident light */
side retro-reflector, triangular: amber; however the rearmost side retro-reflector can be red if it is rouped or has part of the light emitting surface in common with the rear position lamp, the rear end-Outline marker lamp, the rear fog lamp, the stop-lamp or the red rearmost side-marker lamp.
Reply With Quote
Bookmarks