eg series compatability

[SD_]

Alot of aftermartet companys make parts that will fit on the eg6, apart from the obvious engine differences are parts like suspsnsion catbacks ect. made for eg6 able to fit on other eg hatches. maybe a dumb question but wasnt sure.

[[[d a n n y]]]

yes it will
but if u wanna put Eg6 coilovers on u need the EG6 lower control which are the same as the DC2 ITR control arms.

[SD_]

so the lower control arms are different on different egs

[JasonGilholme]

Only the EG6 ones.

The rest of the EG's are the same

EG2,5 etc = DC2

EG6 = DC2 Type R

[SD_]

icic thanks for the help

[tRipitaka]

Only the EG6 ones.

The rest of the EG's are the same

EG2,5 etc = DC2

EG6 = DC2 Type R

EG9 = EG6 too..

and i believe JDM EG4 is the same as EG6 too

and (if you can find one) EJ1 = AUDM EG LCA


although if you want a set of extractors made for EG6, it won't fit any australian EG.. unless a b series engine has been put in..

[JasonGilholme]

EG9 = EG6 too..

and i believe JDM EG4 is the same as EG6 too

and (if you can find one) EJ1 = AUDM EG LCA


although if you want a set of extractors made for EG6, it won't fit any australian EG.. unless a b series engine has been put in..

Except for an EG2

[RMN15N]

eg6 = dc2R front sway bars fit straight in =D