My DIY camber mod

**rtsnoz** · 14-02-2007 02:38 PM

Any ideas what parts I have bent/damaged and will need to replace to return the camber to standard? And approx costs?

I've had enough of this mod!
Cheers,
Rohan

**egSi** · 14-02-2007 02:49 PM

what happened? whats bent?

rear lower control arm? trailing arm?

shit

**mrwillz** · 14-02-2007 02:51 PM

looks like psotive +10 camber
:S

**m3ntAL_l2** · 14-02-2007 02:55 PM

lol wot u do?

**SPEEDCORE** · 14-02-2007 02:56 PM

I'll take a punt....
"Another victim of lift off oversteer"

**mrwillz** · 14-02-2007 02:58 PM

effect of hafing car to high

**SPEEDCORE** · 14-02-2007 03:02 PM

Originally Posted by mrwillz

effect of hafing car to high

No.... nature of the FF beast.

**rtsnoz** · 14-02-2007 03:13 PM

came round a bend... not infact going particularly quick... round the bend however, what i hadn't realised, was dirt on the road from recent storms. hit the dirt. slid straight into the curb almost parralell (in line with). *bang* then somehow i think the wheel caught curb, and the rear of the car was airborne for a moment. Probably doing 40km/h. maybe less...

pulled over... had a look... said F**K

**Rasputin** · 14-02-2007 03:33 PM

See if you can get under there and take a picture of the 'metaly mechanical bits' connected to the wheel/shocks etc. Might be able to see what's bent/broken then.

**martin** · 14-02-2007 05:09 PM

my friends car looked like that and when he went to the mechanic he said that the axle was broken n a whole heap of shit.

**nugget666** · 14-02-2007 05:16 PM

Originally Posted by rtsnoz

Any ideas what parts I have bent/damaged and will need to replace to return the camber to standard? And approx costs?

I've had enough of this mod!
Cheers,
Rohan

hmm about a 4 inch drop :