Just get a basic socket set if you plan on doing a bit of odd work here and there

If you want quality tools you are almost always better to stay clear of complete sets, normally they are cheap crap.

Something like SnapOn or Power Built is pretty decent.

Most common sizes you will need for a Honda is 10, 12, 14, 15 and 17mm Time to time you will need 19mm for removing the likes of the seat belts and sometimes the suspension might use a 19mm somewhere along the time

If you have a lowered car don't get ramps, my Accord Wagon in stock height can make it up ramps without planks of wood.

But do get a decent hydraulic jack not a cheap super cheap one if you value your fingers.
Good axle stands are a must! NEVER EVER rely on the jack to hold up the car when you are working on it... NEVER!

Just really start our with the basics like I said; then buy more tools when you need or break them.