Replacing Cluster Plastic on DC2

[Moya]

My plastic on my cluster is burnt from armorald or something.

Anyways I bought the replacement plastic from Honda.

Is it a quick 2 second swap?

Undo top 2 screws on the cluster. Slide it out, then I'm guessing theres simple wiring harnesses that unclip? Then replacing the actual plastic is easy too?

Just wanted to check before I do it

Thanks

[destrukshn]

yes easy as, it's just clipped in.

[incoming]

pretty much spot on

for the actual plastic "window"
get a stanley knife and "cut" the glue off and then pop off the clips

[Moya]

Yeah, was a piece of piss.

Annoying part was the greasy cables on the back, and not touching the new plastic with my greasy hands

2 screws to pull the front of the cluster out.
3 Screws to remove the cluster from the dash.
Pull out of 3 wiring harnesses

Then the plastic is held on with 6 clips which easily come off.

incoming, not sure what your talking about with a Stanley knife. Didnt need one at all, no glue or anything either.