ok just gonna say something random... for those of you who are at or above 100wkw... is it a big noticable difference to stock?
all i have to say is that my stocker del sol is an absolute piece of shit despite the engine being in perfect condition. kinda reminds me of gen2 5.0l v8s... plenty of sound but goes nowhere.... i have heaps of parts on the way so i hope all goes well....
Originally Posted by Slow96GSR
If 1 person has had bad luck with a product don’t condemn it until you yourself have tested it. Now if 10 pros have tried it and it sucked then I would trust their opinion.
ok just gonna say something random... for those of you who are at or above 100wkw... is it a big noticable difference to stock?
all i have to say is that my stocker del sol is an absolute piece of shit despite the engine being in perfect condition. kinda reminds me of gen2 5.0l v8s... plenty of sound but goes nowhere.... i have heaps of parts on the way so i hope all goes well....
The increase in power is definatly noticable & getting over 100kw isn't rocket science.
So depending on what you've got comming, you'll probably get there with out any trouble.
BTW: The Del Sol CRX has the heaviest flywheel of all the B16A's,
This makes it a bit doughey to drive.
Changing the flywheel will wake it up straight away.
TODA Performance Australia Pty Ltd TODA Racing - FIGHTEX - MFactory - HALTECH - EXEDY Race engines, Dyno tuning, Licenced workshop, Parts.
P:0401869524 email: toda@todaracing.com.au
^^damn thanks... was wondering why idle rev to redline was slower than my sr20. i guess i have a reason to kill my clutch quicker...
Parts already on the way are:
- Black Heat wrap + hi temp wrap seal spray
- Custom extractors w/ 2.5 collector (to be wrapped)
- SRI (to be wrapped) + making box for pod
- Outlaw Engineering Intake spacers + replacement studs (runners+TB)
- 2.5in 300cell Hi flow metal cat (to be wrapped)
- MSD external coil dizzy cap + LX91 Crane Cams coil
- Iridium plugs (to be gapped 1.5mm - 1.8mm)
- Neo Platinum 5w30 oil + Purolator filter
- Cam seal (metal + triple o-ringed)
Already installed:
- foam pod (very loud vtec)
- AFPR (set at 36psi, i still think i'm running rich though)
- voltage stabilizer + grounding wires.
TO purchase later and install as a set:
- Puck Clutch
- Light flywheel
- OBX LSD
- Tein SS or D2 coilovers
- Slotted rotors + braided lines
Originally Posted by Slow96GSR
If 1 person has had bad luck with a product don’t condemn it until you yourself have tested it. Now if 10 pros have tried it and it sucked then I would trust their opinion.
Reply With Quote
Originally Posted by yourfather
Bookmarks