Spoon FD Civic bumping cornering

**artistic** · 03-04-2007 03:08 AM

weird movement

http://www.youtube.com/watch?v=ReC1zUGSsX4

**gerard** · 03-04-2007 08:30 AM

In the old days, I would have thought axle tramp

**aaronng** · 03-04-2007 08:37 AM

Damper setting was probably for a JGTC track, but not properly adjusted for Tsukuba.

**PaZzMaN-R** · 03-04-2007 02:57 PM

weird handling there:S

**black_jazzato** · 04-04-2007 04:57 PM

Spoon might have to re-adjust rear damper to suit with tsukaba but in didnt happen with Spoon FD street version as you can see from the link below. It look very stable for Street version.

http://www.youtube.com/watch?v=Hit17uZP6pc

**[[d a n n y]]** · 04-04-2007 11:17 PM

Originally Posted by aaronng

Damper setting was probably for a JGTC track, but not properly adjusted for Tsukuba.

i sorta disagree u might be right but.
i recon the FD chassis is still relatively new so it was a test bed..(IMO)
definately spoon will put more R&D into the new CTR but damn that cars still bounces all over the place

**VT3C** · 05-04-2007 10:33 AM

if you were runnong 20/18 KG/mm springs YOU'd be bouncing allover the place too if you were driving that hard

**black_jazzato** · 05-04-2007 03:11 PM

Originally Posted by VT3C

if you were runnong 20/18 KG/mm springs YOU'd be bouncing allover the place too if you were driving that hard

Kind of understand what you talking about. Thanks!

By the way, Nice pic with Mr.Ichishima!! Damn jealous!! cause I'm a big fan of Spoon

**VT3C** · 05-04-2007 03:32 PM

hahahaha.. well the standard issue springs on spoon full-spec coilovers are 20kg/mm front and 18kg/mm rears.. your stock springs are ~3-5kg/mm... that's VERY hard.

thanks Ichisima-san says "Hi" hahaha.. got more than a photo when i was there