Page 10 of 21 FirstFirst ... 7891011121320 ... LastLast
Results 109 to 120 of 245
  1. #109
    Member Array
    Join Date
    Sep 2006
    Location
    Edensor Park
    Car:
    dc2 [vte-33c], S2000 AP1

    Thumbs up

    dell99

    which ones?

    i seriously cant tell the difference? hahahah

    for me in real life .. its actually fine .. maybe its the picture ...

    good luck dell999



  2. #110
    Member Array
    Join Date
    Jul 2006
    Location
    Brisbane
    Car:
    EK Civic
    ur bottom right is definately brighter mate. But does anyone know if the wires would be different for the sides.

    What i mean is that on passenger side that the red is for the brake and the green is for the parker. Wouldn't logic dictate that on the driver side it is also red for the brake and the green for the parker.

    Cause since i have used heat shrink for the wires it would be a B!tch to get it out and such.

  3. #111
    Member Array
    Join Date
    Apr 2006
    Location
    Melbourne
    Car:
    EK>DC5R>S2K&JAZ
    could just be the angle of pic it was taken and its affect to the lense. ??

  4. #112
    I was equipped by Mugen Array
    Join Date
    Sep 2003
    Location
    Perth
    Car:
    Lexus Soarer V8 GTLimited
    George.. mate I soooo was going to put Euros in there !
    I thought of JDM tailights but cbf'd in the end

    Its looking good !



    Honda resource for enthusiasts with all the latest news from Honda, downloads, media, photo albums, technical information and lots more!

  5. #113
    the wire colors are identical left and right. in the link I posted you have all applicable wire colors and their functions in the connector diagram. Not hard to figure out, what needs to go where.
    96er NH701M EK3 w/ Facelift Conversion and EP3 Rebadging
    00er blue-eyed daughter

  6. #114
    Member Array
    Join Date
    Jan 2007
    Location
    Sydney
    Car:
    EM1
    went through repco peakhurst for those bulb holders, they ordered some for me and will get them next week
    Last edited by steve88; 23-04-2007 at 12:47 PM.

  7. #115
    Newcomer Array
    Join Date
    May 2007
    Location
    Gold Coast
    Car:
    EK CIVIC
    did this the other day, a really simple but effective mod ! nice post

  8. #116
    Member Array
    Join Date
    Jan 2007
    Location
    Sydney
    Car:
    EM1
    same here, took me about 2hrs and i love it! but i had too pull extensively the plastic around my boot (hatchback). and for my left backlight i had to take the bracket that holds speakers up off, couldnt fit a ratchet in there (i even had a flexible small one)... but i had a small blowtorch ($20 bunnings, burns off lighter fluid) and it cut those holes perfectly with its pencil tip blade + my knife!!

  9. #117
    hey guys! i need help lol

    ive wired all the lights up correctly(i think) BUT now only the parker lights come on, NOT the brake lights!!! UH OH!

    if someone could give me a bit of guidance i would really appreciate it.

  10. #118
    Member Array
    Join Date
    Jul 2006
    Location
    Brisbane
    Car:
    EK Civic
    happened on my frnds car. Which every side is causing the trouble just rewire it.

    My frnds.

    Driver Side = red to red, green to green.
    Passenger = red to green, green to red

    dun ask me y but it worked for him lol
    See a good post..... Then do one even better

  11. #119
    its both sides that arent lighting up...im going to have a look into it tomorro, any advice would be greatly welcomed

  12. #120
    Member Array
    Join Date
    Aug 2005
    Location
    Perth
    Car:
    FN2R
    check you havn't blown a fuse by accident by some odd chance ?
    n3rb-alicious !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.