Page 2 of 2 FirstFirst 12
Results 13 to 24 of 24
  1. #13
    Member Array
    Join Date
    May 2006
    Location
    Brisbane
    Car:
    380GT,XTrailSTR
    ^^^Thanks for all the help... was trying to avoid doing too much DIY on this car but unavoidable i guess (traumatised from last car being written off.. soo much work only to pull it all out in the span of 2 weekends)...

    will give that ebay kit a go.... it actually has an H3 bulb rated at 55w... is that big/strong enough for a high beam?

    I vaguely remember my single light lo/hi H4 for the NX being rated at 55w/110w lo/hi....
    Quote Originally Posted by Slow96GSR
    If 1 person has had bad luck with a product don’t condemn it until you yourself have tested it. Now if 10 pros have tried it and it sucked then I would trust their opinion.

  2. #14
    Member Array
    Join Date
    Jun 2005
    Location
    syd
    Car:
    560hp
    for the h4 bulbs, it's usually, 55/65watts
    from my understanding, h3's are made for foglights, but are also the cheapest to manufature into lights themselves, eg. cheap angel eye head lights, uses h3, for the low beams, which is kinda useless i reckon.
    also.
    foglights are supposed to be low, not high.. becuase if there was actually fog, it would just reflect off the fog, and not shine through, that's why it's low. lol.

    but yeah, quite frankly, i'd probably just try source the normal high beam lights.
    also, your car can't be a import, becuase, your VIN came up on hondas system, and honda only keeps australian VIN numbers on system.
    so maybe it was changed? or had a front ender?
    who knows now.
    lol

  3. #15
    Member Array
    Join Date
    May 2006
    Location
    Brisbane
    Car:
    380GT,XTrailSTR
    ^^yeah pretty sure it's been in a slight front ender lol... can see traces of the damage will i will fix myself later.

    i know its gonna cost an arm and a leg, but was wondering if i could get a quote off you for the fogs if it is able to be sourced?
    Quote Originally Posted by Slow96GSR
    If 1 person has had bad luck with a product don’t condemn it until you yourself have tested it. Now if 10 pros have tried it and it sucked then I would trust their opinion.

  4. #16
    Member Array
    Join Date
    Jun 2005
    Location
    syd
    Car:
    560hp
    Quote Originally Posted by dsp26 View Post
    ^^yeah pretty sure it's been in a slight front ender lol... can see traces of the damage will i will fix myself later.

    i know its gonna cost an arm and a leg, but was wondering if i could get a quote off you for the fogs if it is able to be sourced?
    fogs or high beams?

  5. #17
    Member Array
    Join Date
    May 2005
    Location
    Syd West
    Car:
    ek4lyf


    if u want foggies, try and source this front bar lol .. rare mofo

    CEE CEE DUB U

  6. #18
    Member Array
    Join Date
    May 2006
    Location
    Brisbane
    Car:
    380GT,XTrailSTR
    Quote Originally Posted by destrukshn View Post
    fogs or high beams?
    high beams thanks!!

    just curious on price brand new thats all... may grab em if all good!!

    the yellow fogs suck.... look exactly like the one jdm_kid posted
    Quote Originally Posted by Slow96GSR
    If 1 person has had bad luck with a product don’t condemn it until you yourself have tested it. Now if 10 pros have tried it and it sucked then I would trust their opinion.

  7. #19
    Member Array
    Join Date
    May 2006
    Location
    Brisbane
    Car:
    380GT,XTrailSTR
    Quote Originally Posted by jdm_kid View Post


    if u want foggies, try and source this front bar lol .. rare mofo


    holy wtfomgbbqsauce!!!!!

    i want those headlights!!!!!!!!!!!!!!!!!

    and yeah the bar is nice.... but i want those headlights!!!!!!!!!!!!
    Quote Originally Posted by Slow96GSR
    If 1 person has had bad luck with a product don’t condemn it until you yourself have tested it. Now if 10 pros have tried it and it sucked then I would trust their opinion.

  8. #20
    Member Array
    Join Date
    May 2005
    Location
    Syd West
    Car:
    ek4lyf
    more pics of car / headlights



    CEE CEE DUB U

  9. #21
    Member Array
    Join Date
    May 2006
    Location
    Brisbane
    Car:
    380GT,XTrailSTR
    man ur teasin.... where can i get those headlights *cries*

    ***EDIT***
    nm.. found his cardomain and its custom
    http://www.cardomain.com/ride/463444
    Last edited by dsp26; 23-04-2007 at 09:33 PM.
    Quote Originally Posted by Slow96GSR
    If 1 person has had bad luck with a product don’t condemn it until you yourself have tested it. Now if 10 pros have tried it and it sucked then I would trust their opinion.

  10. #22
    ...ZzzzZzzz Array
    Join Date
    Aug 2005
    Car:
    Pushbike...
    Pretty sure they are custom job. Try contacting SAXMAN on O/H. He is from the States but he is able to custom make Angel Eye headlights or point you in right direction for making your own.

    Aint cheap & not an easy job though, Im dying for a manufacturer to make their own OEM item!

    And that Black CRX is HOT!



    BTW - Any more photos of the rims on that black one? Might have to install some Enkei RPF1's or RS7's... Dont know why I havnt so far... Tooooo busyy
    Last edited by Twincam16; 23-04-2007 at 11:37 PM.
    -------------------------------------------

    FFFFffffuuuuuuux999

  11. #23
    Member Array
    Join Date
    May 2005
    Location
    Syd West
    Car:
    ek4lyf
    you could try these headlights ? good ppl too

    http://www.autodynamic.com/detail.as...=HDS9397HBC-YD
    CEE CEE DUB U

  12. #24
    Member Array
    Join Date
    Dec 2004
    Location
    Melbourne
    Car:
    RD7
    Quote Originally Posted by jdm_kid View Post
    you don't need to source the front bar..
    existing AUDM front bars have been stenciled out for fogs..
    so all you need to do is cut it out..

    the hard part is finding fogs.. with a switch..
    Quote Originally Posted by ChargeR
    Ozhonda mods don't sleep, they wait.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.