DC2R Rails Into EK

[Bodgy Racing Developments]

Can DC2R rails fit into an EK civic? What sort of modifcation needs to be done?

Any help would be great, thanks

[bennjamin]

easy.

Just swap the INNER rail (one closest to the handbrake/belt buckle) on the seat with the car yo want it to fit. 2 small screws , and 3 small 10 or 12mm nuts and the whole side will come off , swap it over and reinstall.

The OUTER rail is exactly the same on both cars.

[Bodgy Racing Developments]

so just get the inner rails from my stock ek seats and fit it to the dc2r rails?

[bennjamin]

so just get the inner rails from my stock ek seats and fit it to the dc2r rails?

Well , this works for standard seats , i have heard off issues with recaro rails.

Ideally , you would take the INNER rail / mount off the DC2R seat and swap it with the EK one. And thats it - the OUTER is the same as the EK design.

[Bodgy Racing Developments]

it would be for dc2r recaro rails. so yeh.

[bennjamin]

it would be for dc2r recaro rails. so yeh.

just sit it all down with a few tools and have ago.
Try what ive suggested and see if that works - small chance the EK/DC2R rails might be slightly different height.
normal DC/EG rails are the same height as EK rails

[EG5]

what seat you gonna installed ?

[Bodgy Racing Developments]

dc2r recaros. but dont really wanna spend another 400 or so on rails unless i really have to.

[kayot1k]

should be possible if own a set of ek rails also.
like benn says sit down have a look at it and give it ago.

cheap as chips,