Page 1 of 2 12 LastLast
Results 1 to 12 of 18

Thread: dc2 doors

  1. #1
    Member Array
    Join Date
    Aug 2004
    Location
    Cabramatta
    Car:
    am bu lan

    dc2 doors

    hey guys, when i close my doors on my dc2, the dorr makes a rattling sound, i think its the glass, not too sure, n e 1 else have this problem?

  2. #2
    Member Array
    Join Date
    Jan 2004
    Location
    Sydney
    Car:
    Integra VTI-R
    Does it rattle when your driving with the window is down?

    If so you will have to replace the bally channel on the inside on the door.. if it rattles just from closing.. there is an article in www.team-integra.net that resolves it.. Or you can use some eletrical tape on the door catch (the U thing on the car) and the door doesnt rattle so much on closing.. that what i have done.. don't put too much on or your door doesn't open and close smoothly..

  3. #3
    Member Array
    Join Date
    Aug 2004
    Location
    Cabramatta
    Car:
    am bu lan
    nah doesnt rattle while driving. just when you close the door. WHen i close the doors on my friends 200 and other cars, the sound is nice n solid, just a thump. but mine is like a weird rattling sound from the glass or sumfing.

    N e ways JSL, fanx for the link and tape trick. i'll try it out!

  4. #4
    Member Array
    Join Date
    Jan 2004
    Location
    Sydney
    Car:
    Integra VTI-R
    Quote Originally Posted by faijai
    nah doesnt rattle while driving. just when you close the door. WHen i close the doors on my friends 200 and other cars, the sound is nice n solid, just a thump. but mine is like a weird rattling sound from the glass or sumfing.

    N e ways JSL, fanx for the link and tape trick. i'll try it out!
    ahh then the tape trick should work ok.. works for me

  5. #5
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    this happens a bit with Integra's, sometimes the door lock comes loose or the door strike, also the rods that go to the door handle hit the door body if there not seated into there holding clips correctly. also the window can rattle in its channels. pull your door trim off and have a look, also do a search as some one had a similar question not that long ago.

  6. #6
    Winner! Array
    Join Date
    Sep 2003
    Location
    sydney
    Car:
    dc2
    my windows rattle...
    im too afraid to take the door lining off to fix and tape and tighten stuff behind there.

    i dunno why...

    ive taken my whole car apart with no tools or anything, and not knowing what im doing.... bah lol dunno why door trim is soo scary for me.
    when do we hit vtec?

  7. #7
    Member Array
    Join Date
    Aug 2004
    Location
    Cabramatta
    Car:
    am bu lan
    Ooh thanx ecu man. my bad for not doing a search. hehe

    fried - yeh sumtimes i get scared to pull my car apart too. not just the door but everyhting. but i guess gotta lern to do sum stuff one day!

  8. #8
    Quote Originally Posted by JSL
    Does it rattle when your driving with the window is down?

    If so you will have to replace the bally channel on the inside on the door..
    Could you explain to me which part is this ?

  9. #9
    Green block gangster Array
    Join Date
    May 2004
    Car:
    twin GX160's
    the bally channel is the channel your window is seated in at either side. usually the guide comes out and causes the window to become loose in the channel.

  10. #10
    Member Array
    Join Date
    Aug 2003
    Location
    Sydney
    Car:
    Nil
    theres a rubber insert thing... it sometimes comes loose and comes off
    a new one is around $35 honda

  11. #11
    Ohhh icic.. thnx ECU MAN & FANATK
    i'll go check it out tonight

  12. #12
    Member Array
    Join Date
    Dec 2003
    Location
    Syd
    Car:
    F20C Clubman Build
    Fanatk: where did u get your rubber insert from???

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.