4-2-1 headers, what brand is good at reasonable price??

**mikul_ha** · 12-06-2007 05:58 PM

thanks for the link didz!

not much difference in the dyno sheet between the spoon and toda...

**andiiso** · 12-06-2007 09:23 PM

what are the price differences though, and also with spoon you gotta buy a spoon cat aswelll is that the same with toda ? if so how much is it all, put together and which one is cheaper ?

**Perry** · 12-06-2007 10:53 PM

since toda and spoon are made from JAPAN you are require to run a jdm cat or a aftermarket cat which everyone tends to do

**EG30** · 13-06-2007 05:58 AM

I'm getting a set of Toda headers for our DC2R in the next month or so, will get it ceramic coated and an aftermarket cat to suit. Most likely to go for the MetalCat with flanges to be welded on by the exhaust shop we use a lot.

Will post some pics once they are installed onto the car.

**fatboyz39** · 13-06-2007 09:41 AM

Heard that "someone" might be comparing all different brand headers very soon. Back to back dyno readings. :P.

**xtercii** · 13-06-2007 09:53 AM

Shit when is that happening? That will be exciting, any donations of particular header needed?

**Benson** · 13-06-2007 10:19 AM

Originally Posted by EG30

I'm getting a set of Toda headers for our DC2R in the next month or so, will get it ceramic coated and an aftermarket cat to suit. Most likely to go for the MetalCat with flanges to be welded on by the exhaust shop we use a lot.

Will post some pics once they are installed onto the car.

Why not a set of RMD headers since you are gonig to change the CAT. Proven results already with two ITR motors hitting the 13's barrier

**jdmTYPE R** · 13-06-2007 04:20 PM

DTM headers...

**ZeForce** · 13-06-2007 06:29 PM

SMSP/Hytech

**z3lda** · 14-06-2007 05:34 PM

xforce ftw

**shebangs** · 14-06-2007 05:54 PM

Originally Posted by z3lda

xforce ftw

Yep, you'll definately win with xforce headers. Aslong as you racing a bunch of ricers.

**dsp26** · 14-06-2007 06:01 PM

Originally Posted by EG30

I'm getting a set of Toda headers for our DC2R in the next month or so, will get it ceramic coated and an aftermarket cat to suit. Most likely to go for the MetalCat with flanges to be welded on by the exhaust shop we use a lot.

Will post some pics once they are installed onto the car.

if your interested in a high flow metallic cat, lemme know i have a really good source and for a damn decent price brand new... say 1/4 price of catco/metalcat

tested it at the exhaust shop before fitting the catback... gets red hot very quickly on idle... but then again mine was heat wrapped so that may have helped also.... but it's a good sign that it will function good....