Page 1 of 2 12 LastLast
Results 1 to 12 of 22

Thread: Engine Idle

  1. #1

    Engine Idle

    what is your RPM when engine idle? my one sometime below 600rpm specialy when a/c on the engine shake more. anyone had these problem?

  2. #2
    Member Array
    Join Date
    Jul 2005
    Location
    Sydney, WPH
    Car:
    Integra DC5 Type R '03
    from my apex'i neo, what i seen the lowest is 650rpm i think, not 100% sure because i drive off after it reaches below 1000rpm.

    shake more?
    '03 Integra DC5 Type R

    Wakefield Park: 1:13.047 w/ street tyres
    Eastern Creek Int'l Raceway: 1:57.969 w/ street tyres
    Power: 155Kw with Mugen N1 ECU

  3. #3
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    650rpm or thereabout. It drops slightly when you turn on the A/C. Are you using any engine torque damper in your car?
    --------------------------------------
    Stocky CL9 - 1:17.2

  4. #4
    i used to have engine damper on the car before, it makes the engine shake more on my car. from reading on my vafc2 sometimes wait on the traffic light the rpm sometime drop below the 600 rpm looks likly engine stall. are we able to change the engine idle high a bit from the vafc2

  5. #5
    Member Array
    Join Date
    Jan 2004
    Location
    Melbourne
    Car:
    ED Civic & 380GT
    Quote Originally Posted by fatfish View Post
    i used to have engine damper on the car before, it makes the engine shake more on my car. from reading on my vafc2 sometimes wait on the traffic light the rpm sometime drop below the 600 rpm looks likly engine stall. are we able to change the engine idle high a bit from the vafc2
    I used to have a rsm and don't recall revs ever dropping that low.

  6. #6
    Newcomer Array
    Join Date
    Dec 2006
    Location
    Melbourne
    Car:
    Accord Euro std 6MT
    About 650rpm when the engine is idle.
    2006 CL9 Accord Euro 6MT - Nighthawk Black Pearl
    Mods: | 5,000k Polarg HID Bulb | PIAA LED Licence Plate & Parking Light Bulb |

  7. #7
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Have you cleaned your filter?
    --------------------------------------
    Stocky CL9 - 1:17.2

  8. #8
    not yet, but soon i am going to clean, is this could be the problem?

  9. #9
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Quote Originally Posted by fatfish View Post
    not yet, but soon i am going to clean, is this could be the problem?
    Could be. But usually it isn't a problem.

    Also, are you getting 600rpm why your car is in D? Or does it happen in P or N as well? If it happens just in D, then change your auto trans fluid.
    Last edited by aaronng; 09-07-2007 at 12:39 AM.
    --------------------------------------
    Stocky CL9 - 1:17.2

  10. #10
    yes it was happen when i put in D. if is the auto trans fluid i might change it when i service my car.
    thank you aron

  11. #11
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Quote Originally Posted by fatfish View Post
    yes it was happen when i put in D. if is the auto trans fluid i might change it when i service my car.
    thank you aron
    Remember to give us an update after you change it.
    --------------------------------------
    Stocky CL9 - 1:17.2

  12. #12
    ok not a problem

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.