saturated or peak and hold injectors

[IEVAQ8]

hey guys i posted a thread looking for RC 550 cc injectors for my dc2r...
whats the difference in saturated or peak and hold????
i am using injectors fro turbo setu if that makes a difference?????????

[Boost]

Saturated or Peak hold is the type of injector resistance.
Saturated - > high resistance
Peak hold - > low resistance

Depending on your injector driver you should select an injector type to suit.
A Peak Hold driver can drive a Peak Hold or Saturated injector. But a Saturated driver should not drive a Peak Hold injector. The response time of the Peak hold injectors are also better than the Saturated injectors.

This is a simple calculation to determine the injector size depending on the power you plan on making.
http://www.rceng.com/technical.htm

[DLO01]

For your DC2R you need saturated injectors, simple swap in.

If your getting RC's, you also need the old OBD1 clips.

These links may help:

http://www.ozhonda.com/forum/showthr...ight=injectors

http://www.ozhonda.com/forum/showthr...ight=injectors

[IEVAQ8]

thanks guys.
deano: do you mean the standard clips i will need to use???? or get other ones?????
and i'm geting 550cc so, saturated is direct fit and the clips are from???????

[DLO01]

thanks guys.
deano: do you mean the standard clips i will need to use???? or get other ones?????
and i'm geting 550cc so, saturated is direct fit and the clips are from???????

Get other ones.......

RC's use the older OBD1 clips.

Our DC2R's are OBD2.

So what I am saying is that if your getting 550cc in the RC's you will need to get the older OBD1 clips.

The injectors fit straight in. But the stock DC2R clips will have to be cut off and the new clips will have to be wired in.

[IEVAQ8]

thanks heaps