TODA headers to CL9

[Pumped]

lol 4g for a turbo?

might look nice, won't do much

[aaronng]

that much?
pretty expensive just for a header

It's not "just" a header.

[aaronng]

Thanks Aaron. The reason I ask is that according to TODA_AU, in this thread http://www.ozhonda.com/forum/showthr...light=flywheel, he says:
.

Considerable margin - is he right here? And if he is, what does he mean by considerable? I'm asking because I am planning to do some similar modifications.

If you have a big cash reserve at the moment, then go clutch, flywheel and final drive. But for most of us, even finding $1000 to put into the car is a big ask. That's why we do I/H/E first. You can do each one at a time. If you did clutch, flywheel and final drive, it would be best to do all 3 at the same time to minimise on labour. If you have the finances to do all 3 at once, then go for that.

And yes, the flywheel and final drive will transform your car quite a bit.

[Cranial]

Cool.

I don't have big cash reserves, but ~$2000 just for a Maxim/Toda header is not cheap either in anyone's language!
I've got all the parts already, just waiting for time for installation (DC5R LSD, Exedy clutch, custom lightweight flywheel, J's Racing 5.1 Final Gear).

Just wondering if anyone else has done the final drive...?

[aaronng]

Cool.

I don't have big cash reserves, but ~$2000 just for a Maxim/Toda header is not cheap either in anyone's language!
I've got all the parts already, just waiting for time for installation (DC5R LSD, Exedy clutch, custom lightweight flywheel, J's Racing 5.1 Final Gear).

Just wondering if anyone else has done the final drive...?

Is the J's racing 5.1 final ratio for the k20a or for the k24a?

[Cranial]

It's for the k20a. My mechanic says it will fit the k24a gearbox, as he's opened up one before and done some modifications to it using DC5R (k20a) parts. He's very cluey so I trust him.

[aaronng]

It's for the k20a. My mechanic says it will fit the k24a gearbox, as he's opened up one before and done some modifications to it using DC5R (k20a) parts. He's very cluey so I trust him.

Ok, because I know someone who got a k20a final drive from the DC5R and it wouldn't fit into the K24a box.

[Cranial]

We'll see what happens when I get it all done. Hope it'll fit. Will post thoughts once its done (within the next few weeks).

[aaronng]

We'll see what happens when I get it all done. Hope it'll fit. Will post thoughts once its done (within the next few weeks).

I'll also be interested in the cost of installing your parts as well. I want to get an LSD installed.

[TODA AU]

how much are these??

Rec retail price is $1685
OZHonda member's price is $1500 - delivered
The G/B (just past) price was $1285 - delivered

Strangley only 2 Euro owners jumped on that price.
Just out of interest, was it not well know about the G/B or was there just little interest?
Let me know, as we could probably sort something out for just the Euro guys.
Cheers

Adrian

[aaronng]

Rec retail price is $1685
OZHonda member's price is $1500 - delivered
The G/B (just past) price was $1285 - delivered

Strangley only 2 Euro owners jumped on that price.
Just out of interest, was it not well know about the G/B or was there just little interest?
Let me know, as we could probably sort something out for just the Euro guys.
Cheers

Adrian

I would have bought one as well but funds are tight at the moment.

[adammet04]

i didnt know about the G/B..

traders almost need to create mailing lists for people to subscribe to !!..