where could we get this camber kit if I m interesting on it ..?
thanks...
The ones posted above are "Mr Alex's" but I am not sure if they suit the dc5.
Originally Posted by riruiz_88
here are some by J's Racing, they are similar to skunk2 design. they seem to be thicker though. gotta admit these do look the good
^ Personally, I would stay away from anything that looks like the above design, but that is just IMO. The other problem that some people are facing is that the rubber boot of the ball joint has also been known to fail.
See a good post? Give it a PQ point.
Originally Posted by ludecrs
They have the depreciation re-sale value of a burnt out and multi-rolled Commodore.
Personally, I would stay away from anything that looks like the above design, but that is just IMO. The other problem that some people are facing is that the rubber boot of the ball joint has also been known to fail.
they also do upgraded ball joints for control arms. im just tryin to help out, throwin some ideas out
damnnnn you really had me worried with this thread coz i have this camber kit.. but taking a second look you'll notice that mine has been reinforced in the weak area.. lucky.. thought i wasted my money :P
they also do upgraded ball joints for control arms. im just tryin to help out, throwin some ideas out
Thats not an upgrade to the Ball joint on the Upper control arm.
The picture you've shown is a roll centre adjuster/correction (For lowered cars) which mounts to the Hub and goes into the lower control arm.
on the topic of ball joints.. whats the implications of not having sufficient grease in there or if the boot rips ?
The boot usually keeps the grease in and its not something you'd take out to service. If the boot rips, that means water and gunk can get in which would
then eventually stuff up the operation of the ball joint.
ahh ok.. the thing that im worried about is that i installed the camber kit without greasing it up (assuming it came pre-greased from factory).. and its too big of a job to pull it back apart.. especially after getting everything aligned..
Bookmarks