Page 1 of 3 123 LastLast
Results 1 to 12 of 28
  1. #1
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ

    What Gauges do I need on a low boost setup?

    Hey Guys

    I've got my GReddy kit from the US but I forgot about Gauges

    Boost Gauge
    Air/fuel Gauge?
    Oil Temperature Gauge?

    Cheers Guys

    LukeZen
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  2. #2
    Member Array
    Join Date
    Feb 2006
    Location
    Brisbane
    Car:
    60-POV
    If you're planning to get a boost controller then just get an electronic one since most of them have built in boost gauge. You can buy the other gauges aswell but its not really needed on a daily car.

  3. #3
    boost
    oil temp
    oil pressure

  4. #4
    Member Array
    Join Date
    Jun 2005
    Location
    Brisbane Queensland
    Car:
    1985 ford laser
    most air/fuel gauges off shelf are only narrow band, which are completely innacurate and dont really surve any functional purpose. The only Real Air/fuel Gauge is a Wideband and are quite expensive, $500ish i believe atleast
    Probably the best gauges for you to get would be either boost, oil temp/pressure or water temp. But really for a basic setup you would really only need a boost gauge.
    Light up with Lyle - Electrical / Communications / Instrumentation

  5. #5
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Quote Originally Posted by Sexc86 View Post
    most air/fuel gauges off shelf are only narrow band, which are completely innacurate and dont really surve any functional purpose. The only Real Air/fuel Gauge is a Wideband and are quite expensive, $500ish i believe atleast
    Probably the best gauges for you to get would be either boost, oil temp/pressure or water temp. But really for a basic setup you would really only need a boost gauge.

    Thanks guys

    Anyone know of some better written GReddy turbo kit instructions?

    The ones that came with it blow hard
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  6. #6
    Ozhonda Supporter Array
    Join Date
    Jul 2004
    Location
    Brisbane
    Car:
    MV Agusta F4
    You don't NEED any gauges.

    But its 'good' to have.

    Boost/Vac
    Oil Temp
    Oil Pressure
    Water Temp

    And thats not necesarily because you are boosting your car. They are good either way.
    Deano.

  7. #7
    Member Array
    Join Date
    Nov 2006
    Location
    Jimboomba, QLD
    Car:
    The Moving Kind
    as dean said, no gauges needed. but i recommend the same as he has said.

    also if u have a cxi model it is good to get a tacho of some sort in the car

  8. #8
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Quote Originally Posted by DLO01 View Post
    You don't NEED any gauges.

    But its 'good' to have.

    Boost/Vac
    Oil Temp
    Oil Pressure
    Water Temp

    And thats not necesarily because you are boosting your car. They are good either way.
    Can we narrow it down to two?

    I'm only getting a two gauge pod holder lol

    Quote Originally Posted by Aza View Post
    as dean said, no gauges needed. but i recommend the same as he has said.

    also if u have a cxi model it is good to get a tacho of some sort in the car
    Nan Got tacho

    Civic VTi
    Last edited by Lukezen27; 26-08-2007 at 02:12 PM.
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  9. #9
    Member Array
    Join Date
    Jun 2005
    Location
    syd
    Car:
    560hp
    i would say boost and oil pressure.

  10. #10
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Quote Originally Posted by destrukshn View Post
    i would say boost and oil pressure.
    I'm looking at this one

    http://cgi.ebay.com.au/ws/eBayISAPI....MEWA:IT&ih=001

    ?
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

  11. #11
    Member Array
    Join Date
    Nov 2006
    Location
    Jimboomba, QLD
    Car:
    The Moving Kind
    i got mine brand new for 60$, but unless ur going for a full matching face (as in more then one guage) it dont really matter what one u use just so long as it works, so im sure that one would be fine. but if u buy second hand make sure the needle reads right and hasnt been messed with (it isnt that hard to throw the needles off, mines off buy 1 psi )

  12. #12
    Member Array
    Join Date
    Nov 2004
    Location
    Manly Yo
    Car:
    ED/EG5/EP3/JAZZ
    Quote Originally Posted by Aza View Post
    i got mine brand new for 60$, but unless ur going for a full matching face (as in more then one guage) it dont really matter what one u use just so long as it works, so im sure that one would be fine. but if u buy second hand make sure the needle reads right and hasnt been messed with (it isnt that hard to throw the needles off, mines off buy 1 psi )
    Cool as

    Got the matching oil gauge
    http://cgi.ebay.com.au/ws/eBayISAPI....MEBI:IT&ih=001
    161.4KW ATW Tuned By TODA
    EG5 JDM B16A SiR-II TURBO

    13.28@106.6mph 2.117 60ft On RE001

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.