!!!car + Power Specs!!!

[kazam]

yeh thats a good idea. this is infact a good thread..

[civic65]

Civic EG

Honda B18C
Darton MID Sleeved to 85mm
Arias Pistons 13 to 1 (I think)
Scat Rods
ACL Bearings
Light weight custom flywheel & SBC clutch
Cyl Head P72 extensive porting
Ferrea Valves
Crower Springs & Retainers
Rocket M22x Cams
Custom 50mm 4 throttle manifold with Carbon airbox
Custom Headers
Motec M48

Gearbox
ATS 3-4-5 gearset
Mugen LSD
4.4 final drive

Tuned by DynoDave 210Hp ATW

[Benson]

Civic EG

Honda B18C
Darton MID Sleeved to 85mm
Arias Pistons 13 to 1 (I think)
Scat Rods
ACL Bearings
Light weight custom flywheel & SBC clutch
Cyl Head P72 extensive porting
Ferrea Valves
Crower Springs & Retainers
Rocket M22x Cams
Custom 50mm 4 throttle manifold with Carbon airbox
Custom Headers
Motec M48

Gearbox
ATS 3-4-5 gearset
Mugen LSD
4.4 final drive

Tuned by DynoDave 210Hp ATW

Nice list of mods! Is this the race car that Dave talks about?

[civic65]

Yes it is, so no 1/4 mile times available.

[ALLMTR996]

Civic EG

Honda B18C
Darton MID Sleeved to 85mm
Arias Pistons 13 to 1 (I think)
Scat Rods
ACL Bearings
Light weight custom flywheel & SBC clutch
Cyl Head P72 extensive porting
Ferrea Valves
Crower Springs & Retainers
Rocket M22x Cams
Custom 50mm 4 throttle manifold with Carbon airbox
Custom Headers
Motec M48

Gearbox
ATS 3-4-5 gearset
Mugen LSD
4.4 final drive

Tuned by DynoDave 210Hp ATW

New Abe/DD setup coming soon for 2008 racing season I am told PP with bigger Rocket motorsport cams.
ALLMTR996

[ALLMTR996]

Civic EG

Honda B18C
Darton MID Sleeved to 85mm
Arias Pistons 13 to 1 (I think)
Scat Rods
ACL Bearings
Light weight custom flywheel & SBC clutch
Cyl Head P72 extensive porting
Ferrea Valves
Crower Springs & Retainers
Rocket M22x Cams
Custom 50mm 4 throttle manifold with Carbon airbox
Custom Headers
Motec M48

Gearbox
ATS 3-4-5 gearset
Mugen LSD
4.4 final drive

Tuned by DynoDave 210Hp ATW

The new setup must be ok was the fastest lap time of any Honda around Bathurst at the easter FOSC meeting and still not using the cams or header they want to use.
ALLMTR996