DC2 Vti-R 1/4times.......what should stock pull

[martin]

nah not some pro driver was my first time running at the creek for my 14.879 run the 60ft time was 2.245 and mph was 93.28 and tyres were toyo proxes T1R dropped to 20psi at the front and 45 at the rear

[zco]

a 2.3 sec 60ft time is not actually very good at all...

(no offence zco!)

none taken tinkerbell
lol. yes 2.3 is a fully sick shitt time lol. im not saying it is good..
but here are the circumstances.. for a 1.6L, no torque, no lsd, and no brand street tyres, thats all i can manage. it was my VERY FIRST TIME on the track, and as you can see, my first run showed it . 18.XXX seconds LOL !
if you look further into the thread, i went back 2 weeks later and got 2.225. still an average time, but it got better

LOL 2.3 is noob 60fter..oppz...

CRX b16a dead stock besides 2.5' exhaust manage 14.7 also. I guess thats about right?

yes.. noob i was. first time i ever hit the track was that night.. but i have to say, that 14.7 for a 1.6L is not a noob time.. look at jimmy. he's been down the strip heaps of times, and his CRX does a 14.7 aswell

i tend to think the only skill in a 1/4 is the 60 foot time. The rest is just shifting 3 times and holding on. So a 2.3 is pretty average the rest is the car doing the work

i think you should stand behind some cars going down the strip.. they dont even drive straight. and thats just one thing that increases their ET. its the entire process that gets you the end result..

The skill is in the consistancy...

i tend to disagree, i believe shifting helps as well. Obviously if you shift like a granny your time will be affected. Furthermore, not knowing the shift points or shifting too early your time will be affected.

14.7 is a good effort from Zco. I dont see anyone else on the forum doing that so yeh, just give him credit and not make it seem like anyone else here can do it, by saying the 'car' is doing the work

thanks john.. and mr benjammin.. i heard about your impressive run

[bennjamin]

thanks john.. and mr benjammin.. i heard about your impressive run

my 60ft was teh same as yours lol. Im just holding onto a stock 1.8 as opposed to you holding onto a 1.6
Lets see how we all go 2mrw !

[VTI-RRR]

got my 4-1 headers installed and hopfully my new VAFCII tuned buy next week will be running it at calder on the 26th of this mounth..... looking to brack 14.5...lol hopfully

[IEVAQ8]

good luck breKING 14.5...........

[locote]

what was ur term speed???

[VTI-RRR]

thankz IEVAQ8 i will need some luck to brake that time and maybe a miricale.......lol

[tinkerbell]

just need a slight tail wind mate

[zco]

thankz IEVAQ8 i will need some luck to brake that time and maybe a miricale.......lol

you dont need a miracle. close mate of mine ran 14.4 dead stock with no weight reduction. he had a SRI though using redline gbox oil.. all other parts came from factory. all the best in your run

[VTI-RRR]

thankz 'zco' i will do my best and hopefully the tuner do a good job with the tune of the vafcII which will help alot....

[IEVAQ8]

who is gonna tune???????

[VTI-RRR]

the person that gonna tune my car would be between akmotorworks, james aka black crx or maybe chasers............