Page 2 of 2 FirstFirst 12
Results 13 to 20 of 20

Thread: mods

  1. #13
    Member Array
    Join Date
    Jul 2007
    Location
    Behind the wheel of my car, cruising the hills of adelaide
    Car:
    ED6 Civic
    Quote Originally Posted by cristian View Post
    is it blowing a lot of smoke?!?

    my old motor died coz the head was goneskies...
    the last 2 weeks before i got it changed i would drive the car to places, and have a full radiator, perfectly good water pump and no water leaks but still it would overheat after about 10 minutes of driving...
    nah, had the head fixed recently so no smoking. also had a new water pump put in too. but the coolant temp gets a little too high for my liking sometimes, and then the coolant just vaporises. it overheats after 10 minutes of half-throttle sprinting, which is rather unusual. its not too bad if i drive slower. i'll have my mechanic look into it once i get most of my parts in. was planning a major modification soon, so i'll get it looked at at the same time.
    Current Performance Modifications to ED6:
    not telling, but it involves a semi-quad carb setup, and lots and lots of compression.

  2. #14
    Member Array
    Join Date
    Aug 2006
    Location
    west sydney
    Car:
    Shitty Rail
    ahh k...

    i had that problem before...the spring in the radiator cap was springing at a lot lower pressure levels than it should...and it used 2 let coolant out into the reservoir but never the other way around...
    Quote Originally Posted by aaronng View Post
    SOHC VTEC = great fuel consumption!
    DOHC VTEC = what fuel consumptioBAAAAAAAAAAAAAAAAAAAAAA!!!!!
    "A religious war is like children fighting over who has the strongest imaginary friend"

  3. #15
    Member Array
    Join Date
    Jul 2007
    Location
    Behind the wheel of my car, cruising the hills of adelaide
    Car:
    ED6 Civic
    ahhh, hmm, could be the problem, altho i swapped radiator caps recently. for some reason, coolant in mine doesnt want to go into the reservoir until it boils >.<

    oh btw, is there much clearance between your extractors and airconditioning and radiator? my front end is dented in, so im a little short on space when i get my extractors fitted.
    Current Performance Modifications to ED6:
    not telling, but it involves a semi-quad carb setup, and lots and lots of compression.

  4. #16
    Member Array
    Join Date
    Aug 2006
    Location
    west sydney
    Car:
    Shitty Rail
    Quote Originally Posted by SeverAMV View Post
    ahhh, hmm, could be the problem, altho i swapped radiator caps recently. for some reason, coolant in mine doesnt want to go into the reservoir until it boils >.<

    oh btw, is there much clearance between your extractors and airconditioning and radiator? my front end is dented in, so im a little short on space when i get my extractors fitted.
    yeah, the extractors sit pretty much where the heat shield used 2 be...theres about a centimeter gap between the piping and the fan...
    i dont know how u'd tackle that man, maybe mod ur radiator mounts...
    Quote Originally Posted by aaronng View Post
    SOHC VTEC = great fuel consumption!
    DOHC VTEC = what fuel consumptioBAAAAAAAAAAAAAAAAAAAAAA!!!!!
    "A religious war is like children fighting over who has the strongest imaginary friend"

  5. #17
    yeah im thinking engine swap atm not to sure as to what to change it to.. want something so i can have more power.. but dont wanna spend much.. haha but yeah atm ... also the motor i got now..when i rev it.. it blows a little black smoke.. whats that mean ? real rich on fuel ?

  6. #18
    http://www.ozhonda.com/forum/showthr...=34440&page=13

    go to the bottom... thats a pic of my car.. what it is atm

  7. #19
    Member Array
    Join Date
    Jul 2007
    Location
    Behind the wheel of my car, cruising the hills of adelaide
    Car:
    ED6 Civic
    Quote Originally Posted by ef-civic View Post
    yeah im thinking engine swap atm not to sure as to what to change it to.. want something so i can have more power.. but dont wanna spend much.. haha but yeah atm ... also the motor i got now..when i rev it.. it blows a little black smoke.. whats that mean ? real rich on fuel ?
    if you're lucky, its rich on fuel, if you're unlucky, one of your cylinder's is going and the fuel isnt combusting. i'd probably check your filter first, if its clogged up it wont be getting enough air for complete combustion so it may blow black smoke.

    it all depends on how much power you really want. some owners complain about the b16a after hyping it up so much, so im not too sure about it there. but engine swaps to me are relatively expensive and could probably be outclassed by modifying the existing engine.

    if you have faith in your motor's durability, i'd go the way of the ebay turbo kit and replace some internals and maybe opt for a smaller faster spooling turbo from a wrecker. the ebay turbos are 600-ish, leaving you plenty for internals. but your motor's reliability will go down significantly beyond 5-8psi boost. but the turbo will increase the efficiency of your carbs by a fair bit so the power boost should be noticeable.
    Current Performance Modifications to ED6:
    not telling, but it involves a semi-quad carb setup, and lots and lots of compression.

  8. #20
    Member Array
    Join Date
    Sep 2007
    Location
    Brisbane
    Car:
    EG5 Vti-T 6psi
    hey man this thread is kinda old but if you want to upgrade to a d-series (more than enough power for your platform) sohc vtec,************** i just think it'd be the best way to go for your chassis etc
    Last edited by claymore; 24-11-2007 at 05:51 PM. Reason: NO SELLING BY NOOBIES

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.