Motor Change guide for EG * B / D / H / K SERIES !!!!

**bennjamin** · 15-10-2007 12:50 PM

Originally Posted by Lukezen27

Not unless its more than 15% in power to your other motor

wrong , its 15% displacement

So , a 1.6 CAN put a 1.8 in their engine bay with no altercation to brakes etc.

**Lukezen27** · 15-10-2007 01:16 PM

Originally Posted by bennjamin

wrong , its 15% displacement

So , a 1.6 CAN put a 1.8 in their engine bay with no altercation to brakes etc.

Nope its both now

I just got all that info before when i was about to get a B18C7 swap

Not 100% sure but quite sure

**steve88** · 15-10-2007 01:58 PM

so a D16 non vtec - b16 dohc vtec greater than 15% ?

also, for anyone who's gone from D series to B, do you guys notice much of a difference?

**bennjamin** · 15-10-2007 02:03 PM

Originally Posted by Lukezen27

Nope its both now

I just got all that info before when i was about to get a B18C7 swap

Not 100% sure but quite sure

Please try and find the exact info ~ the rules , as of the last time i got my car blue slipped ( about 4 months ago) were that -

The engine would be within +15% displacement.
It would come from similar or based chassis (IE DC engine into a EG etc)

These are the basic set , to legally install a new engine into your ride without major engineering.

**Lukezen27** · 15-10-2007 02:36 PM

Originally Posted by bennjamin

Please try and find the exact info ~ the rules , as of the last time i got my car blue slipped ( about 4 months ago) were that -

The engine would be within +15% displacement.
It would come from similar or based chassis (IE DC engine into a EG etc)

These are the basic set , to legally install a new engine into your ride without major engineering.

Sorry Ben I can't find it, only the displacement

http://www.rta.nsw.gov.au/registrati.../vsi/vsi06.pdf

I'll see if I can find it in my e-mail at home

**mocchi** · 19-10-2007 07:00 PM

how about i6? has anyone ever done an i6 on an eg?
lets say a 2jzge or a rb30de? but i dont think it would be as awesome as the civette from ht.. drift it!

**[[d a n n y]]** · 19-10-2007 07:54 PM

it;s 15% cap increase luke im pretty sure.

**DreadAngel** · 19-10-2007 07:57 PM

Originally Posted by mocchi

how about i6? has anyone ever done an i6 on an eg?
lets say a 2jzge or a rb30de? but i dont think it would be as awesome as the civette from ht.. drift it!

They've put V8s in EGs in the front and in the back so anything goes...

**Lukezen27** · 19-10-2007 08:00 PM

Originally Posted by [[d a n n y]]

it;s 15% cap increase luke im pretty sure.

Hey Danny

Yeah you guys might be right.

May have been the insurance company I was thinking of going with that asked for both.. I can't find the info I was thinking of..

**steve88** · 20-10-2007 04:05 PM

anyone tried too see if their premium/excess goes up (under 25) if you engine swap under same/different displacement?

**guneg4** · 22-10-2007 12:30 PM

Just wondering If anyone can help me as I have put a b16 into my eg4, but now the wipers do not return to the home postion when I turn them off, my intermediant wipers do not work neither does the horn, the interior light only works from the pasenger door so does the warning beeper for the lights.
I changed the complete wiring loom from the left head light, to computor, the dash loom both of them and the loom that goes from the right head light back to the under dash.
I might be missing a relay or two as new your right foot under the dash I have three pugs not used one is a three pin plug, one is a two pin plug and one is a ten pin plug.
Thanks in advance
Ant.