Just want to know if anyone has fitted a DC2 rear bar onto a DA9 Integra LS, if so what problems have they come against and how did it look
MTR - Mad Turk Racing
DA9 LS/Vtec V2,145.8kw ATW V2,PB 13.409@107mph 2.299 60ft.... 4.5 year old r888's DYNO DAVE TUNED
Like a Post you See then hit me, PQ+
I dont really see that happening. For starters the dc2 is more round than the da9 is, and IMO there should only be 2 rear bumpers put on a da9, one being the mugen half bar cover, or the 92-93 rear bar
yep mugen rear bumper cover.. so hard to find and especially at cheap prices..
dc2 bar, whats the point? just put the 93 bar on
even the type r rear lip looks good on the da as well..
i want the dc2 bar for the fact that the exhaust runs out from the right side like mine is, not familiar with the 93 bar does it run out from right hand side aswell
MTR - Mad Turk Racing
DA9 LS/Vtec V2,145.8kw ATW V2,PB 13.409@107mph 2.299 60ft.... 4.5 year old r888's DYNO DAVE TUNED
Like a Post you See then hit me, PQ+
Heres an idea, why dont you cut out the exhaust section from the left hand side of the bumper, and then cut out the exact same shape section out of the right hand side of the bumper, and then get a plastic welder to weld up the sections, so you still have the stock bar, but with the exhaust section on the side you want it? Its much cheaper and better looking than a dc2 bar manipulated onto a da9
Btw, sorry to steal your thread, but freek, have you found anyone in aus that does the mugen rear bar? or are they all in america like ive seen?
Bookmarks