What Sway bars for my eg civic

[destrukshn]

i shall say alot smaller, myself have only heard of 2 sub frame tearouts from in proper installations on em.
but that was due to not tighting the bolts tight enough.
these are on the eg/dc chassis i shall add.
but plenty on the ek.

[bennjamin]

ive heard of 3 from proper installation , just normal wear. Add my old EG , got the subframe plucked out from a whiteline "replacement" swaybar ( POS 1st gen thing).

So thats 6 EG/DCs , for like 30 ek's.
Still , show me a link of a failed ASR brace.

[Sexc86]

So let me get this right, The Whiteline sway bar does not mount to factory holes in the car? This is why you need a mounting kit? And its the whiteline mounting kit that is not good? so it would be allright to run a whiteline sway with a ASR brace?

Has Anyone ever run EIBACH sway bars?

http://cgi.ebay.com/ebaymotors/ws/eB...RL:MOTORS:1123

17mm rear 26mm front

[Limbo]

Ben your wrong. The whiteline bars fit with ASR brace.

i'm running whiteline 22mm adjustable with ASR brace, no issues. Just need the brackets generic swaybar mounts from supercheap. Cost $20.

[bennjamin]

Ben your wrong. The whiteline bars fit with ASR brace.

i'm running whiteline 22mm adjustable with ASR brace, no issues. Just need the brackets generic swaybar mounts from supercheap. Cost $20.

Do show us all some pix


I should of added that whiteline bars have the tendency to sometimes be alittle different one to the next. I have tried fitting before and it would not clear due to the bends. (also in the past there has been issues with whiteline bars not having the same clearance than a similar item etc)

[egSi]

be careful with whiteline lyle, recently it was rumoured that they were bought out or had a merger with a bush company and they keep no stock on the shelf and have been 'iffy' on quality. whiteline 12 months ago is awesome imo. that being said i have also had my RSB for 2+ years with no ill affects.

hard decision on what to buy nowadays imo

[Sexc86]

So bach to origional question

what are some manufactures that make sway bars in these sizes for an Eg civic? and where can i obtain some

also the Whiteline swaybars, are the designed so they just cant bolt on to factory honda holes / points, you need a mounting kit in which to do so?
, and the so called problem with whiteline is the mounting kit and not the swaybar itself? so really if a whiteline sway were used with a ASR brace it would infact be good?

Anyone Tried EIBACH Sway bars? 26mm from 17mm rear though

http://cgi.ebay.com/ebaymotors/ws/eB...RL:MOTORS:1123

[bennjamin]

Sexc86 , when searching online look up "EG6" parts to help u out for any JDM replacement stuff

[Sexc86]

will the ek9 CTR sway bars suit Eg? or only Dc2r

[1996ek1]

While yous are talking about swaybars, are thicker always better?
And is there a benefit to having a BEAKS lower tie bar if you have an ASR brace?

And this could possibly relate to Lyle if CTR sways fit his car but,
Are CTR front + rear sways the best option?

[Sexc86]

Bump any new info? what are the size options available for CTR / ITR sway bars? that will suit an EG with an ASR?