Quote Originally Posted by adammet04 View Post
as per the title,


The other thing is that i noticed that there was nothing to fix/fasten the tube of the intake to the other tube that is there that points thrgh to the fog light / head of the car. i could see one of those brace on the bottom tube but not if that should be going around the tube i connected it to..

i unfortunately have to go out for a couple of hours now, but will check back and take pictures tommorrow hopefully to illustrate my concern better.

any initial feedback would be much appreciated !!!

Ads

ummm basically wat i did is get one of those clamp things( not sure of correct name) and basicaly connected both ends of the piping together...and secured it with the clamp..

however be careful not to tighten the clamp too much...as the pressure maybe too much for the plastic cyclinder piping to withstand...and cause cracking etc etc