CIVIC EK + ASR + AUDM ITR SWAY...does it work?

[BlitZ]

u get everything with the ASR kit.

all you need is EK4/9 endlinks and ITR/CTR sway bar...


check the ASR website out if you are really interested.. it has even installation instructions

[Limbo]

pretty sure the ITR bar itself will not work on the ek4. Its a slightly different design with the bends and does not clear parts of the car properly.

The ek9 one should be fine with the ASR kit.
ASR kit comes with all bolts and bits needed. If your gonna get the ASR might as well get the 22mm whiteline swaybar, its better than the CTR or ITR swaybar and the whole reason you get the ASR in the first place

[Killa From Manila]

i see... coz i already got the asr kit and ek4 endlinks so i thought it was just slap on the endlinks and off i go. i guess not..wil have to look into it more

[zco]

pretty sure the ITR bar itself will not work on the ek4. Its a slightly different design with the bends and does not clear parts of the car properly.

The ek9 one should be fine with the ASR kit.
ASR kit comes with all bolts and bits needed. If your gonna get the ASR might as well get the 22mm whiteline swaybar, its better than the CTR or ITR swaybar and the whole reason you get the ASR in the first place

the dc2r sway bar fits the ek + asr bar. you need endlinks from ek4/ek9. thats it

if you read the article/manual online from asr, they say the same thing aswell. they used a bigger 23mm bar from jdm itr and mounted it with ek endlinks