Page 1 of 2 12 LastLast
Results 1 to 12 of 15
  1. #1

    apexi rsm kilometre reading problem

    hi i have an EK4, and i installed a RSM on the car..
    the kilometres reading on my rsm is different compared to my car's tacho..
    both have been reset to 0 everytime i fill up petrol and it's da same...
    it's about 20 km difference.
    anyone can help?

  2. #2
    do you reverse alot?
    when u reverse the RSM will count up whereas the dash will go backwards
    20km is alot, most of the time mines like .5 Km out at most

  3. #3
    recovering.... Array
    Join Date
    Aug 2004
    Location
    SyDnEy
    Car:
    Nicole
    reverse for like 20km? i reckon even 5km of reverse is still too much .. way too much


  4. #4
    no mate, i dun reverse a lot
    haha
    i just drive normally
    and it's always around that much...not just like once
    i tested it for like 8 times already

    help me..i dunno why
    would it be the settings on my rsm?

  5. #5
    Member Array
    Join Date
    May 2004
    Location
    Melbourne
    Car:
    The FN2R
    rolling diameter of aftermarket wheels will affect the rsm reading and also the stock speedo is not 100% accurate to start with. it will show a little under the actual speed your travelling.
    rsm can be setup to take wheels sizes etc into consideration, read the manual or go to apexi website to find it

  6. #6
    Needs more time... Array
    Join Date
    Aug 2003
    Location
    Sydney
    Blog Entries
    12
    Quote Originally Posted by alan
    rolling diameter of aftermarket wheels will affect the rsm reading and also the stock speedo is not 100% accurate to start with. it will show a little under the actual speed your travelling.
    rsm can be setup to take wheels sizes etc into consideration, read the manual or go to apexi website to find it
    Yeah what size rims and what profile rubber do you have?
    Got a question? Check out the FAQ - http://www.ozhonda.com/go/faq

  7. #7
    yeh, it doesnt matter if the rsm is slightly off, mine was (this was the speedo reading... ) the rsm was more accurate i believe i had 17's...
    フジタエンジニアリング

  8. #8
    ok so the rsm is more accurate...
    thanks for the help...
    i appreciate it..
    cos i had the rsm on my previous car..it was perfect match to my speedo....
    that's why it seemed strange to me...

  9. #9
    Needs more time... Array
    Join Date
    Aug 2003
    Location
    Sydney
    Blog Entries
    12
    Quote Originally Posted by alphabeatsco
    ok so the rsm is more accurate...
    thanks for the help...
    i appreciate it..
    cos i had the rsm on my previous car..it was perfect match to my speedo....
    that's why it seemed strange to me...
    So do you ahve different sized rims/tyres to stock?
    Got a question? Check out the FAQ - http://www.ozhonda.com/go/faq

  10. #10
    yes i do have different sized rims and tyres...

  11. #11
    Needs more time... Array
    Join Date
    Aug 2003
    Location
    Sydney
    Blog Entries
    12
    Quote Originally Posted by alphabeatsco
    yes i do have different sized rims and tyres...
    That's probably why the reading is off :
    Got a question? Check out the FAQ - http://www.ozhonda.com/go/faq

  12. #12
    then can someone pls tell me what's the ek4 factory tire size and diameter...and also what is it's car weight.
    so i can setup my RSM properly...
    much appreciated..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.