500 bucks to spend

[Gio]

really jord?? well man cant wait to see if they are any good bro...add my msn chris_regi@hotmail.com i have mugen grill so thats + 3 kw at the wheels.

[nd55]

> just buy an ASR brace and a CTR sway bar

x3!

Yonas at JDMYard usually has a pile of CTR sways bars with end links.

Alternative is a 14mm rear sway from an EK4. visit your favourite honda wrecker.
No need for sub-frame brace with the 14mm rear sway.

> 98 cxi hatch

You'll need a 26mm front sway to match it.

Look at same generation CR-V at wreckers

Get some new Superpro sway bar bushes to maximize its effectiveness.

Poly motor mounts. Once you get a bit of wheel hop, you'll thank me.
cheap-o Ebay torque arm, tighen it up good and put up with the cabin vibration.

http://www.familyonboard.com/media/s...super_lock.jpg

Child seat restraint/seat belt clamp lock thingie. $8 at Repco.
Best bang-for buck.
Place it on your selt belt, to lock out the slack. Tighten it up real good.
You'll need a deep breath and time to get used to driving without squirming
around in the seat.
Ghetto racing harness, as long as you can put up with the constant tension.

A stock EK civic can generate a fair bit of G force, which you'll never realize cause the OEM seat belt allows so much freedom.

> already have a RAM intake

Sell it.
Eat Maggi noodles for a month, and cut out the booze/smokes. Yes you can do it.
Then buy some good rubber.


Once, you'be been bitten by the bug, start saving for an OBX LSD.

Nick.

[tnezone]

get a camshaft and maybe valve springs... if you buy them used, you might even have $$$ left over!