Results 1 to 8 of 8
  1. #1
    Member Array
    Join Date
    Jul 2004
    Location
    North QLD
    Car:
    EP3R Series 2

    Test 'n Tune - W'bank 23/1/08?

    Anyone coming down tomorrow night? Be good to see some H cars down at Willowbank. Gates open at 5:30pm. This will be my first run in this car... Hoping for high 14...

    Thinking slip clutch at 6K on new Proxes 4 Toyos at 25 psi???? OK for B16?


    .................................................. ..................................................
    Last edited by iijjee; 22-01-2008 at 08:50 PM.
    iijjee
    Turbos Torque... VTEC Speaks!

  2. #2
    Member Array
    Join Date
    Jun 2005
    Location
    NSW
    Car:
    the non-honda type
    If it's on an open diff, then yeah thats a good recipe for a lunch bahahahhahaha

  3. #3
    Member Array
    Join Date
    Jul 2004
    Location
    North QLD
    Car:
    EP3R Series 2
    Whoa........

    Change of plans! Maybe in a couple of weeks I'll get there! Family crisis first!

    Ricer - advice or filling in time? Are you basing this on your experience with high revving NA fwd cars or do you just think the gearbox or clutch will spit it?

    Been down the strip a few times and the balance b/w wheelspin and not bogging down is hard to find - especially if you have a slipping clutch like I have in the past. This clutch should hold up just fine, and I can't see the 'box dying, but if I drop the clutch at 4.5K it may bog down and crawl outa the blocks... An 8K launch will work on the burnout pad.

    Just seeing if any experienced B16A or B18C7 runners (fairly stock) might know 'the magic number' for revs off the line.
    iijjee
    Turbos Torque... VTEC Speaks!

  4. #4
    Member Array
    Join Date
    Feb 2006
    Location
    Brisbane
    Car:
    60-POV
    6K launch, are you're wheels 15"? drop them to 20psi.

  5. #5
    Member Array
    Join Date
    Apr 2006
    Location
    Bris Vegas
    Car:
    EK4
    ill be heading down in a few weeks once my car finish.

  6. #6
    i may be taking my car out there next wednesday, not too sure yet, depends on finances.

  7. #7
    Member Array
    Join Date
    Jul 2004
    Location
    North QLD
    Car:
    EP3R Series 2
    Wheels are 16x7. Tyres are 205/40/16 which are smaller in overall diameter than 195/50/15's. 20psi?
    iijjee
    Turbos Torque... VTEC Speaks!

  8. #8
    Member Array
    Join Date
    Dec 2006
    Location
    Gold Coast/NSW
    Car:
    06EuroLux6M
    I'm heading there this Wednesday 6th Feb to test my euro with the extreme jtune kit........

    ...any euro owners want to do a stock comparison?
    Last edited by Merlin086; 03-02-2008 at 02:23 PM.
    133.4kw atw
    14.8 - 400m Willowbank

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.