Quote Originally Posted by BluEG View Post
no, b18c7 should be same as b16a (all dohc b series vtec)

intake : 0.15-0.19mm (0.006-0.007")inch

exhaust : 0.17-0.21mm (0.007-0.008")inch

someone confirm?
Sorry to bring thread back from dead, but these clearances are for cold or hot motor? And they should be the same clearance required on a b18c from what ive read, Ive noticed it isnt as easy adjusting the tappets on a DOHC as it is on the SOHC, if someone could confirm this that would be great, thanks