I just put some eagle eye HIDs onto my Civic but the beam pattern looks like it's going to the left too much and not lighting up the road directly in front enough. Anyone else had this problem before? Anyway how do I re-aim them better?
Also, anyone know how to replace fog light bulbs? Does the front bumper need to come off? I want to put a nice JDM yellow halogen colour in there. (just ordered some)
I just put some eagle eye HIDs onto my Civic but the beam pattern looks like it's going to the left too much and not lighting up the road directly in front enough. Anyone else had this problem before? Anyway how do I re-aim them better?
Also, anyone know how to replace fog light bulbs? Does the front bumper need to come off? I want to put a nice JDM yellow halogen colour in there. (just ordered some)
just the bulb ? no need. just read the manual book, how to change the fog light bulb
It wasn't in my manual on how to change the fog bulb.
Hey does anyone know if HIDs are supposed to be aimed strangely? E.g. in Australia right light aiming mostly down lots whilst the other left one aimed to the left and up a lot more? (Possibly to prevent blinding)? That's how mine are.
Hey people, I think I've discovered what the deal was with my eagle eyes. The dude who installed themmade the right one point down HEAPS. I'm guessing this is because of some legal requirement for HIDs to have the right one down more to prevent blinding of oncoming traffic?? Problem is, in the distance my car looks like a ****ing pirate. The left hand side light is looking nice and bright and slightly bluish whilst the right hand side one has barely any colour because it is pointed down and also looks MUCH MUCH duller, almost like it doesn't have any glow to it. I'm thinking that the right one should be aimed a smidgen upwards to equalise the glow of this light so it looks more similar to the other. Has anyone else had any problems with this? I opened my bonnet and it looks like to re-aim a little I will need to remove my front bumper.
Can anyone provide some help on how to remove the bumper and also re-aim the lights? Is it a matter or moving the light element around or actually pulling the housing apart and re-aiming the projector lens?
I think the right hand side is purposely meant to be pointed down a bit so that it doesn't blind oncoming traffic... but ROFLMAO at your pirate comment.
Bookmarks