Results 1 to 12 of 37

Hybrid View

  1. #1
    Member Array
    Join Date
    Mar 2007
    Location
    NSW
    Car:
    FD1 - RB1
    Quote Originally Posted by jckidz View Post
    dmx, have you had HID for your civic? I'm thinking of doing it myself without removing the front bumper.. I've been searching the forum for DIY guide for this, but I couldn't find one.. Do anyone know how?
    mine, i did remove the bumper to mount the balllast. but my fren, he just put around the radiator area (there is metal bar that u can use), and the cables close enough to reach the headlight. u can try this.

    Quote Originally Posted by LD_Mart View Post
    You dont need to remove the front bumper at all.

    you remove the screws from the splash gaurd where the wheels are and pull it back.
    then you look up and you will be able to see the lights and you twist them and pull it out then place the hid bulb in there while some one helps you pull the cord for the ballast threw from the top of the engine bay.

    fog lights are easy just pull hard on the black cover next to it. then unscrew the light and replace the bulb.

    if you wanna know a bit more in detail just pm me.

    correct bulb sizes are
    Low beam - HB4
    High beam - HB3
    Parkers - W5
    Fog Lights - H11
    my mistakes, sleepy last night, cheers
    Big Brake Kit with Slotted rotor and Braided Line for FD
    http://www.ozhonda.com/forum/showthr...009-Direct-Fit

  2. #2
    Thanks Ld_mart & DMX.. I'll try it out soon..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.